Cisco 5500 Series Network Convergence System (NCS 5500) vs. Cisco Catalyst Switches

Cloud based solutions, these need the necessary bandwidth going from point A to point B. Automate as much as possible from a WAN Core edge standpoint, take away the always on maintaining of the routers/switches on the network. Automation is extremely important in today's world. The Cisco 5500 Series Network Convergence System would not be a very viable solution for a small company, especially from a budgetary standpoint.

Incentivized

Our access infrastructure. If you want to bring many devices into your infrastructure and you don't want to bring the devices direct on the core routers, something like that. Or to the routers, the catalyst switches are perfectly suited for that or for top of direct switches.

Incentivized

• It is versatile due to the diversity in models and form factors.
• Low power consumption compared to similar models
• Mature operating system code allowing for quick production installation and configuration.

Incentivized

• I think particularly for the 2960-Xs, these are quite sturdy. I believe they don't get, even if there's a power outage out at Cole's, we usually do some electricity work just to do the electricity redundancy. We just power off the, let's say, the transformers and then see if the mains can handle the power supply. So these 2960, these switches are quite sturdy, I believe, and they don't die on us, but I've seen with the 9200s and the other switches, they don't come back usually when there's a power outage or something like that. So we have to replace the power supply units and all those things to get them working again.

Incentivized

• Horizontal blade designs are rare these days because if the gear is shipped in a rack, the blade can bend. The NCS5500's blades are horizontal.
• Not a NCS5500 specific issue, but XR has a ways to go, but will continue to grow with customer input.

Incentivized

• I wouldn't fault the product per se. I think it's just more its integration with the SSD access network that there could be room for improvement. I think the 9300 has been a solid device by itself, and I can't think of anything that I could fault on the device itself. It's probably been doing a very good job and we are happy with it.

Incentivized

They are consistently reliable and this switch in particular is a very affordable solution. We can place the Cisco Catalyst 1000 Series Switches gear in areas that we normally would not place a switch because it is affordable enough to make it justifiable. And because it is a reliable solution, we are confident it will continue to provide service over the long haul.

Incentivized

Cisco by and far does a great job with the Catalyst line. From a layer 2 dumb switch all the way up to ISP carrier grade switching within the Catalyst portfolio. The best part about it is command parity among the various tiers of product. The only differences are going to lie in what features are available per switch.

Incentivized

As per our experience, the turn around time for switches after PO is raised varies from 1 - 3 months.

Incentivized

No, the packets flow. Sometimes you will see collisions and broadcast storms can happen which will slow performance but that can be fixed and the packets will flow.

Incentivized

Cisco support is always informative and reliable. Depending on the level of support you subscribe to, the techs and Cisco TAC are well versed in hardware and operating system of the NCS series routers. You can receive 24x7 support and either Next Business Day or 4-hour part replacement from Cisco if required.

Incentivized

We rarely have issues with the product. I have only had to contact support one time since we put it in and that was to see if another vendor was giving me accurate information on an issue I was having.

Incentivized

Cisco Networking Academy partners with many local Colleges and High Schools to provide great hands-on training. You do need to drive to learn the topic. The in-class session only go so far. You really need to apply this to the real world. Cisco makes it easy for business to connect via CLC or Cisco Learning Credits.

Incentivized

My own personal research to get the information I want is very handy and helped me many times

Incentivized

The implementation of the Cisco Catalyst 1000 Series Switches is fairly seamless, especially if you are familiar with Cisco products. We have had Brocade switch gear in place too, and the differences between the manufacturers [are] not a major issue.

Incentivized

Ultimately other Arista and Juniper choices were tested but design and testing did not give much detail as to why these are better overall or in comparison. We are already using Cisco in this level of the topology so that was most likely the strongest reason and fit the application we are using it for.

We do have other vendors. For example, Juniper, Fortinet, and there are quite a few others. And Cisco is pretty good because we know the workflow, we know how the operating system works. We are much more familiar with Cisco products and we know the support system behind it. So in terms of comparing with others, I think it stands out. It's one of our top products to go to

Incentivized

We are exclusive Cisco at our organization. In truth part of the reason is, with one type of switch and one manufacturer, it is easier to support. It is also easier to give consistent training to our staff in our tech department

Incentivized

• 100% uptime for 5 years.
• No successful intrusion attempts in 5 years.
• Very high throughput has allowed for constant and reliable connectivity.

Incentivized

• energy costs dropped by around 11 per cent on the access layer
• management has become easier with DNA Center
• ISSU software upgrades and fabric deployments have significantly reduced "planned" down times
• network speed has increased, latency is at an all-time best within our own LAN

Incentivized