Cisco Aironet 1500 Series Access Points (discontinued)
Score 6.3 out of 10
N/A
Currently supported by Cisco, but no longer sold, Cisco recommends migration to the Cisco Catalyst 9100 Family of Access Points, which offer greater performance and flexibility.
N/A
Cisco Meraki MS
Score 9.0 out of 10
N/A
Cisco offers the Meraki brand of Ethernet switches.
N/A
Pricing
Cisco Aironet 1500 Series Access Points (discontinued)
Cisco Meraki MS
Editions & Modules
No answers on this topic
No answers on this topic
Offerings
Pricing Offerings
Cisco Aironet 1500 Series Access Points (discontinued)
Cisco Aironet 1500 Series Access Points (discontinued)
Cisco Meraki MS
Likelihood to Recommend
Discontinued Products
Cisco Aironet 1550 Series Access Points is very useful for outdoor locations that are more exposed to the wilderness or the weather, which provides uninterrupted wifi access during high winds and bad weather. It also is useful for hazardous locations that are prone to danger or wildlife. Unfortunately, it would not be appropriate to get a Cisco Aironet 1550 Series Access Point if it is only needed for basic wifi use, or indoor use, as the extra features and price would not be necessary.
Cisco Meraki MS is brilliant in very simple environments where basic segregation is required. Many features are pre-configured as defaults and this makes it easy to configure security and stability features like STP protections and UDLD. It is capable of some more complex functions, such as dot1x authentication. TAC support is easy to access and usually timely. Bundling support into the license and making it available through Dashboard is great. We have had issues monitoring the Cisco Meraki Dashboard using legacy SNMP based system - this means we now effectively have one more network monitoring screen to watch. We also sorely lack an ageing timer for stick MAC address port security - essential in uncontrolled locations with no NAC available. We have also had issues with devices pulling DHCP leasing from the wrong VLAN on initial provisioning and then struggling to transition to our management VLAN when the full config is pulled.
Outdoor mesh bridging of access points brings significant cost savings to many of our production facilities. Deploying mesh APs is a significant cost reduction over trenching conduit to connect remote areas via fiber.
Cisco APs are extremely resilient, with a failure rate of below 5% in some of our harshest environments.
Cisco APs have the intelligence to identify wireless interference sources with Clean Air technology
Meraki MS switches are wonderful at allowing a network admin to configure a VPN mesh network without having to have highly specialized knowledge. Unlike Cisco switches, there is no CLI, there is only a GUI, and Meraki support helps you set it up as you add nodes to your network.
Meraki MS switches are easy to deploy. Full stop.
They can work with any firewall or ASA but I would strongly recommend using the Meraki MX security appliance if you are going to use Meraki MS switches because they were made to work together.
They easily stack. It's all done for you in the Meraki cloud control panel.
They will get an address from your admin VLAN's DHCP scope and keep it. Even if you unplug it and move it, you will not have to worry about addressing it.
The GUI is online and you can reach it from anywhere, so as long as you have the credentials, you can manage the network from any device that has a browser.
Being on the cloud its very easy to manage. We have layer 7 visibility and Cisco has introduced stackable MX switches which is even better! The Meraki portal can be accessed via SSO which is important to my organization (although it was a bit difficult to get that implemented initially!)
The Cisco Aironet 1560 Series Access Points served their function well. They were reliable, provided decent speeds, resisted the elements, and provided a good investment. The only downsides were mostly appearance which doesn't matter that much. However, I believe that the tech in the access point is not future proof which is why I did not give it a nine or ten star rating.
Initially I had a problem with the regulatory and channel selection, it was a bug on the AP as it was fairly new, solved by TAC on engineering release, and since then it has been performing flawlessly.
Cisco support for the Meraki products is great. I have a dedicated representative who I can reach out to at any time. They offer numerous online resources and easy to follow tutorials to help the most novice user feel like a pro. When I need support they were ready and quickly helped me solve my problems.
Making the decision to use Aironet is more related to the type of scenario that you have. We chose Aironet because we mainly manage all the network internally and already have Cisco products to integrate with Meraki which is a good option if you are starting from scratch.
Meraki MS provides the sweet spot between manageability and functionality, though not at a significantly lower cost. Desktop support engineers can manage it day-to-day and sometimes that is the most important factor, especially in our case, as a layer 2 switching solution that can also provide PoE to the Meraki MR WAPs.
The software of the Cisco Aironet 1560 is highly scalable, the software is very powerful so that the APs can be customized to the maximum and achieve the best performance of the network at the wifi level. The use of it is very easy for people with low knowledge.
Cisco Meraki MS is intuitive and allows us to easily manage 340+ satellite locations and four corporate locations. Templates, intelligent patching, and alerting are fantastic. This has drastically improved compliance and managing such a large footprint. I would continually recommend Cisco Meraki MS for any multi-site organization because of its ease of use.
With only a few DOA's or failing devices, the AP's are of very high quality.
We expect them to run stable for many years, which is why our initial investment will be an intelligent choice compared to installing a cheaper product.
Although the AP's from Cisco is cutting-edge technology, the 802.11ac standard will be considered legacy in a few years, meaning that its a balance to purchase a well-designed product that won't outlast the tech that it provides. Imagine having an investment in a large fleet of high-quality 802.11b AP's 20 years ago. Although they would still be working flawlessly due to their good quality, the bandwidth would probably be unacceptable to most modern consumers.
