Cisco Aironet 1800 Series Access Points (discontinued) vs. Cisco Aironet 2800 Series Access Points (discontinued)

Cisco [Aironet Access Points] are well suited in offices where they can be managed by a wireless LAN controller (WLC). Using them in this way allows the APs to be well managed and security policies can easily be enforced down to users connecting to these APs for wireless access. Scenarios, where Cisco [Aironet Access Points] are less appropriate, are in small-office-home-office (SOHO) situations because of price and licensing costs to use a WLC to manage them. Thus, using them, in this case, would be that the APs would have to be in Autonomous mode, and the technical know-how in converting a lightweight AP to an Autonomous one is not straightforward.

Incentivized

Cisco Aironet 2800 Series Access Points is very well suited for large enterprises and high-density environments. It is not well suited for high ceiling buildings like warehouses and storage places because of low antenna gain. In our main office, it is working very well. For around thirty or so wireless devices this access point works very well and after forty or so wireless devices it starts to suffer.

Incentivized

• Until 2018, our Aironets were 1560 series, and each was managed separately. We had about 9 devices, 3-4 per floor, strategically placed on each floor to get a good coverage map over a three-floor environment. Their coverage was greater than expected. With the latest 1852 models we have, they are managed by a controller, and frankly, the coverage is a smaller area, requiring more units. We have worked with support for months and this is the final outcome of all the setting changes - we simply need more devices to cover the same area.
• None of the models I have used have needed reboots. We usually only reboot the devices annually, and they don't have issues requiring restarts.
• With the 1560 series, the connection strength was extremely consistent. With the new 1852 model, which is managed by one of the WAPs as a controller, it is supposed to use smart technology to load balance (optional) and determine which of the WAPs is appropriate to connect the requesting device to - great idea - but it does NOT work well.

Incentivized

• They are rock solid in terms of reliability (we rarely have to replace them).
• They are easily managed from the controller. It's easy to push new settings out, like RF profiles, etc...
• They are fairly easy to install using the included mounting brackets.
• They seem to be compatible with pretty much everything, although occasionally we will have roaming issues with Apple devices.

Incentivized

• On the Mobility Express models, it’s hard to configure all from the GUI, and sometimes the GUI is buggy
• In Mobility Express, the (virtual) controller is not able to push the right image to the APs. This sometimes results in not joining the APs
• Some minor issues with firmware

Incentivized

• CleanAir - Put this technology into all the APs.
• GPS Tracker - I can't understand why only the Cisco 1570 has this option as well as larger Cisco 3800 APs. Why can't this be in all APs so they can be easily mapped in Google for positioning and later plotted for the coverage zone.

Incentivized

If Cisco keeps innovating the feature sets on the next 1800 models, I would definitely try it out to improve the experience of my users and to keep them on the latest technologies

Incentivized

Because until now I haven't had any issues or cases where I needed to create a ticket with Tac from Cisco related to their performance or availability. They have a small size that permits or allows you to install it in each place that you need to mount it, their design is small and appropriate for every kind of office.

Pretty straightforward guide, which was built since OEAP600 AP's and never improved, this is a good thing for user to tackle when they configure the personal SSID, but does not reflect how it should be in 2020, where everything is mobile compatible and app ready. Cisco are going to have an app for this, but it comes with greater cost.

Incentivized

Lately we had less issues. Most probably because we reduced the number of Wireless LAN controllers. So less trouble for upgrades as well. We don't have any access point in stand alone mode. It's something I don't suggest, unless it's just for a small office and not for a larger company with different sites.

Incentivized

This access point does not usually randomly shut off. It can't happen but it's generally due to a power over ethernet failures which would could be considered a user error.

Incentivized

Performance is great until you hit load towards the higher end of its rated load. So if you have a super highly congested wifi area, you will want to either deploy a higher end unit or split the traffic to a few of these guys to not see bandwidth issues that you may see otherwise.

Incentivized

Performance wise [Cisco Aironet 2800 Series Access Points] are among of the best pieces of technology we have on premise. I don't say that lightly, we have a lot of cool tech. But if you consider how many users are connecting to these day in and day out without a single blip when they're downloading large files, roaming to new AP's or needing a boosted signal at a far end of the range then these are unmatched.

Incentivized

If you are able to identify the problem initially, you would be able to explain it to the TAC. In order for the TAC to understand it, the TAC engineer must be competent enough to understand it, and have the devices already in lab to test with. Each bug I encountered the TAC was able to help. And I was able to file at least 3 bugs on the 1815T and M.

Incentivized

I believe that there is always room for improvement.

Incentivized

Make sure to get a professional wireless assessment before purchasing AP's. That way you will only purchase what you need and know where the wiring infrastructure will need to be to streamline the installation and tuning process.

Incentivized

Cisco Aironet has it place in the modern workplace and is great for single location deployments creating a good robust affordable solution. Installing them in a plant that has exposure to environmental elements they have stood the test of time, well so far. If you are looking for multi-location, multi-national or international deployments with a single plane of glass the Cisco Meraki MR's are a better choice, enhancing the time to deploy and ease of management.

Incentivized

D-Link Wireless network solution was being used previously in [a] few areas of our plant and it was working well with [a] low number of users but as the company grew, and user base started to grow we started seeing hanging, disconnection, and very low-performance issues in our wireless network. We replaced the entire network with Cisco Aironet Access Points and since then the issues have been resolved and [the] wireless network is working with great performance.

Incentivized

It can easily support growth and be deployed in multiple locations. The access point has an integrated controller that can manage up to a certain amount of equipment in different locations. Setup is instantaneous and takes approximately 10 minutes to configure itself.

Incentivized

When it comes to deploying the Cisco Aironet 2800 Series Access Points in locations around the school district it has become easier as you get used to putting 4 screws in the mounting plate to the bracket and then slide the access point onto the bracket.

Incentivized

• We can be in Mobility Express mode where the AP provides the controller functionality to support a small to medium deployment without requiring a dedicated controller.
• Access Points are centrally managed via a WLC reducing the management overhead for deployment, configuration, and upgrade.

• There are cost savings in buying a separate WLAN network controller because the 1850 Access Point already has this integrated feature.
• It allows for remote management and saves time on administration.
• The return on investment is achieved in a short period of time.

Incentivized