We evaluated the Nimble all-flash array as a competitor of the HPE 3PAR. During the evaluation, not only did the unit under-perform to the 3PAR, but Nimble was also acquired by HPE. We feel Nimble is a great product, but the 3PAR 8200 is a better fit in relation to our …
HPE 3PAR StoreServ is a great storage device for both file and block-level storage needs. You can use it in place of SAN devices required by database servers. It provides an amazing compaction ratio and, hence, reduces overall storage footprint and cost. This is, however, slightly costly if your environment doesn't really see high transactions most of the time.
HPE Nimble Hybrid storage is very cost effective that can provide the same Latency, I/O and Bandwidth compared with any other All FLASH storage which is 3 times expensive than this. From a feature comparison standpoint of view, there isn't much difference between Hybrid Vs ALL Flash. HPE Nimble Storage uses ALL Flash disk at the front end to process the data thus by reducing the cost by using a regular SAS disk at the back end. Its the software and the algorithm that HPE Nimble StorageE uses to achieve this. having said that, the overall data reduction, de-duplication and compression is above the mark as what the sales team promised initially. Overall, the storage is performing well without any challenges.
We are using HP 3PAR storeServ 8200 for both our file level and block level storage.
I really love the amazing compaction ratio provided by HP 3PAR. Some of our disks have compaction ratio above 25:1, which is super amazing. You can definitely look for around 75% reduction of storage footprints.
It has a great user friendly web console "SSMC"(StoreServ Management Console). This is an additional bonus and can be used by even non-storage people like DBA and Network to take a look at storage performance.
HP Nimble is basically an all in one SAN with SSD cache or in some cases fully SSD based however the thing it does the best is its front end GUI and user management capability making it easy for anyone to ramp up on managing it quickly.
The Nimble SAN is also very easily managed when it comes to hardware management. Outside of some major internal parts such as the mainboard, almost everything in the system is duplicated so single failures never bring the system down. Power supplies and drives are easily swapped out.
Nimble has incredibly capable and easily accessible support that is available 24/7.
The price point on Nimble, though higher than piecing together a home made SAN out of spare Windows Servers, is perfect even for some SMB's.
The system requires a physical or virtual system to manage upgrades and patches and for call home features. Most other systems have this integrated into the array. Just another piece of infrastructure to manage.
There are some system jobs that come pre-scheduled in the initial setup, but there is at least 1 job that should be added to this by default. When you delete storage, you also need to run a job to compact the CPG (a group where the luns all reside) to reclaim the previously used storage as free. This should be done by default at least monthly in the background.
There are 2 different GUI front ends that can still be used. The older version (3 PAR management console) is being phased out (has been for 3 years).
I'd like the GUI to include more information for some of the features such as replication data totals each night. You have to go to the command line for this.
It would be nice to have a feature built into the GUI that would show you the command line equivalent to get the same results you are seeing in the GUI.
Although the intial setup was easy, they could always improve on that portion. During my setup, I did have to do a lot of back and forth with research on their site as to what each setting was that I was setting up. They could have provided some sort of description for each field within the setup that would have made it easier to know what they were having us set up.
We are very satisfied with 3PAR performance and especially the IOPS (Input Output Per Second) is pretty amazing. It is easy to configure and doesn't require much knowledge of storage for Tier 1 support team.
Nimble is doing its job well and any issues that do come up cause the Nimble support team to alert us before we would potentially see an impact to our production environment. I do wish we could expand into the unused space in the CS210 shelf which is limited by what I assume is a marketing/sales strategy, but we will likely add shelves moving forward.
With their phone home technology, we usually have a replacement part on its way by the time we wake up in the morning, or if the event occurs overnight. We have had great support when we had questions or events that required a call.
Any time I have had to contact support, they have always been quick to respond, and very efficient in resolving any issues. When an action has been required on our side for a fix, they have been very helpful in explaining step by step what was required, and when replacement parts have been needed, we've had them within 24 hours.
We still use NetApp storage enclosures at each plant for our routine file shares (CIFS) but I would love to swap them out for the HPE 3PARs as we use for our ERP app data. The 3PARS are simply faster and much better at near-instant replication. But even more importantly we can get the reporting that we need from the 3PAR within a few minutes, even custom reports. 3PARs are much easier to manage than NetApps in general and I think that the only place that they compete is in compaction.
We used a Dell EqualLogic PS Series storage array for many years and it worked well. A big issue was that upgrading firmware required system downtime and during one upgrade I was unable to bring the systems back up afterwards. I spent several days on the phone over a holiday weekend with Dell and VMware support in order to get my systems back up and running. It made me very nervous about doing firmware upgrades after that.
