Cisco Aironet 1500 Series Access Points (discontinued)

At the beginning of the implementation, we had a lot of problems with the barcode readers because of the change of AP coverage areas. Thanks to the software that has the controllers and cleanaire features and the power management and channel change, we were able to control and improve the problem we had when the operations moved and changed coverage zones.

The software of the Cisco Aironet 1560 is highly scalable, the software is very powerful so that the APs can be customized to the maximum and achieve the best performance of the network at the wifi level. The use of it is very easy for people with low knowledge.

Cisco 1550 APs are installed outdoors, in the company's courtyard. They are connected to posts and some connected to a mesh network. APs are external models and have protection against rain, snow, fog, winds. So far, we have had no technical problems with these models. I recommend it because they are very efficient, with great performance and excellent warranty and technical support.

Cisco Aironet 1550 Series Access Points is very useful for outdoor locations that are more exposed to the wilderness or the weather, which provides uninterrupted wifi access during high winds and bad weather. It also is useful for hazardous locations that are prone to danger or wildlife. Unfortunately, it would not be appropriate to get a Cisco Aironet 1550 Series Access Point if it is only needed for basic wifi use, or indoor use, as the extra features and price would not be necessary.

[Cisco Aironet 1560 Series Access Points are] not great for inside the office, it makes the office look ugly. It's antennas are large an annoying to look at, and the color of the shell doesn't make it any better. Its great outside as the housing is very solid and provides good coverage. With an internal antenna, it is somewhat manageable in an office, but it is best suited for outdoor use.

The Cisco Aironet 1560 Series Access Points have fairly flexible and scalable software, and it's not too difficult to add more access points. The software is very able and multiple departments can easily take advantage of the access points. The only downside is that the speeds are not as high as it could be.

Due to its software, it can fit in any outdoor deployment or requirement. It has POE Out port, Various Antenna selection, various powering option, GPS, Industrial rigid design (coming from a very hot and humid area), SFP compatible. You can deploy this AP nearly on any use case you face, I have a successful deployment of 400m distance between two of them as a MESH and it has been running fine for the past 2 years on the beach, it's also providing wired connection to clients on the MESH side. Some other use case is a WGB connected to a AirQuality sensor that has been up since day 1, with no problems whatsoever.

Initially I had a problem with the regulatory and channel selection, it was a bug on the AP as it was fairly new, solved by TAC on engineering release, and since then it has been performing flawlessly.

Whenever I get a new use case, I find 1570 solves it with no problem.

If you want an enterprise wireless network Cisco might not be the de-facto standard (as they are in wired networking equipment) but they are a strong contender. If you are a small company Cisco might not be the first to go to, but definitely give it a good look. Prepare by doing some measurements in your building.

It's great for a big department, if you're small - use something different, Cisco has many great solutions

Everything clear and easy to use

In a rough outside environment - even offshore installation. Combined with a wireless LAN controller installation and deployment is a very smooth experience. This Access Point isn't suitable for installation in an office environment since the housing is very bulky and military gray colored. The CleanAir feature enables excellent coverage in locations with very high channel density and even radio noise.