FreeCAD vs. Tacton Design Automation

I see FreeCad as the perfect solution for a startup with limited resources that want to save as much as possible and doesn't mind using non-standard 3D CAD software, i.e., it's not required by customers to use specific software for compatibility. It's perfect for hobbyist use and makers who don't care about brands and pay monthly fees. I see it as very well suited for small businesses that need FEA (finite element analysis) and can't/don't want to pay huge amounts of money for it, just like us. I see FreeCad as less appropriate for big corporations or well-established businesses that need standardized solutions, compatibility with clients or good version management. Don't get me wrong, it can get the job done, but it will be much slower than state-of-the-art CAD systems.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

For design automation for SOLIDWORKS, I feel Tacton Design Automation is the best solution out there. It's simple to develop and implement for the design/engineering department. But can be implemented within the sales team as well with Tacton CPQ. When a company has products that are modular and/or have many sizing updates, this is where Tacton excels. If you have products that are completely customized, then Tacton or even design automation isn't the best suited for that.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Importing CAD formats
• Converting mesh formats to solid and surface objects geometry
• Fixing errors in geometry cad

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Tacton has a non-linear solver, meaning it can solve lots of equations without them being is a particular order. This enables the software to be incredibly flexible.
• Tacton has a great interface to set up configurators for people to use. No knowledge of programming languages is required. The configurator uses equations similar to Excel equations to control what the users options are.
• Tacton has the ability to easily add lists of data like product lists, beam or pipe sizes that because available for user selections or for calculations.
• The Tacton configurator also automatically builds the user interface as you set up user inputs making it much easier to set up then competitor software.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Overall, the UI feels very old and non-polished.
• There are some quirky behaviors, like being unable to select a plane by having the cursor over it; it has to be over the edges of the plane.
• It's overwhelming having those many modules and options for doing things that appear to be similar.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Layout mode is probably the most lacking aspect of the software (within Tacon Design Automation Engineer). Something so powerful as having modular parts should be more heavily supported. Although, I've heard Tacton is focusing on updating this with better functionality.
• The constraint editor does not display complex/lengthy constraints very well. I end up using Excel to visually break out in cells the different aspects of the constraint.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

Usability is awkward. Perhaps if you learn it as your first CAD, it will feel OK. Still, it comes from commercial CAD products like mine (Onshape, Solid Works, Inventor, Solid Edge). You will feel it is less intuitive, with a less polished UI, difficult to customize and, this is a subjective one, less serious. I'd love to see it improve the usability and UI. I believe the engine behind it is powerful, but how you interact with the software is still lacking.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

Freecad is used often when receiving files from multiple sources and the need to work with cad in various forms from meshes to solid cad. Often when receiving scans of 3d objects the format is easy to work with and convert to traditional cad later on. There is no other cad that can bridge the gap between all the cad formats that we found yet.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

Drive Works is the main competitor for the TactonWorks module of Tacton. We actually discovered DriveWorks and purchased it before we discovered Tacton and started to use it. Once we discovered Tacton we liked it so much better we dropped using DriveWorks and switched to Tacton. I think you could accomplish what you need to in DriveWorks, but it is easier to setup in Tacton and Tacton has alot of features that really can make your product configurators nice

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• It has allowed us to do some cad work that no other systems has allowed us to do and is key to getting that done fast
• It has lots of online support through forums and blogs for trouble shooting
• It could have an updated interface to make the functionality more user friendly for first time users

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Time to produce submittals went from 1-2 weeks down to a couple of days. Then, once approved, normally to produce the fabrication drawings (70+ unique parts) it would take from 4-6 weeks. We can get it down to as little as a few days.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info