Metaroom by Amrax® vs. Designcenter Solid Edge

Well suitable for light planning as we need just to scan the room with the app and then export the 3D model to light planning software.

Well Suited for:

• Integrated designs performed by multiple designers simultaneously (designs requiring a Product Lifecycle Management system);
• Designs requiring a high degree of parameterisation;
• Large companies where specific standards and best practices are applied to all models and drawings created.

Not Well Suited for:

• Personal use in designing one-off models and drawings;
• Small business use where very few of the expensive features are actually used.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• 3D room scanning
• 3D room creation
• Furniture recognition
• CAD compatible 3D room models

• It has very good user interface in classic or ordered environment.
• In 2D or drafting, you can give any Geometric tolerancing and symbols to any dimension. There is a wide range of options available.
• You can convert any files in step file (.stp) and can open it in other designing applications easily.
• After converting 3D drawings in 2D you can make changes in 2D drawing by converting it in the draft. You can also add details like cross-sections and detailed view.
• You can directly make threads without creating holes.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Points of Interest
• Ceiling recognition
• Adding more information about 3D model

• Being used to 2-key and 3-key commands from the keyboard, it would be nice if this was more robust in Solid Edge. The capability of programming keystroke commands exists in Solid Edge, but it would be more user friendly in that regard.
• Editing hatches can be a challenge.
• I'm not a fan of the ribbon bar, but that seems to be a feature across software platforms in Windows.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

As mentioned previously, Siemens Solid Edge is not the most user-friendly of products at all. It requires intense training to make sure that the basics are understood, and after that, there are numerous other training interventions needed to be able to perform expert-level CAD functions. The GUI is not intuitive, as many other packages are, and the features built-in are not well defined. The process to use many of these features is counter-intuitive and requires a mind-shift.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

I have been involved with support and training of Solid Edge for 24 years. Given that I based my business model on support, and have been successful for all these years, I know excellent support. Siemens support for Solid Edge, "GTAC", is the definition of support for a product in every aspect.

FreeCAD is often better than Solid Edge 2021 when converting files, but I hope this changes with 2023 NX is overall more powerful, but that is to be expected (and you cant add it above because it is too short for whatever reason).

Incentivized

Invited by TrustRadius (TR) on Vendor's Behalf

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• 30% less time for 3D room creation
• Better internal project communication

• It took about 20 hours of use to get the basics of Synchronous Technology, and with just a basic competency I was able to make useful changes to the design. One of those changes was impossible to do our other CAD program.
• My use lately has mostly been on personal time and self-driven, so learning other aspects and features of Solid Edge has been slower. Creating a drawing for a part required a few hours to learn and do the first time, but luckily there were YouTube videos for examples. With practice, I would expect the time to reflect what it takes in SolidWorks (about 30 minutes).

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info