Cisco HyperFlex Systems is a hyper-converged infrastructure product, based on technology acquired with SpringPath (acquired September 2017). Cisco's modern HCI solution is Cisco Compute Hyperconverged with Nutanix.
N/A
TrueNAS
Score9.1 out of 10
N/A
TrueNAS is a network-attached storage featuring all-flash and hybrid storage editions, from iXsystems headquartered in San Jose.
Smaller sites that would benefit from a cluster of 2-5 nodes. Not saying that it can't scale above that, but I find HyperFlex a great solution for those sites. A simple 3-node edge cluster can provide a huge amount of resources and redundancy. It's also really easy to scale the environment to meet growth requirements.
A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info
We have many TrueNAS units deployed and they've served us well everywhere. Our most common use case is using it as storage backing for virtual machines. We have Proxmox talking to it, as well as having it acting as the hypervisor. We've never lost data with it, even when faced with multiple disk failures. We've also always found the performance to be robust and able to handle the needs of our clients. Our clients range from libraries, to medium sized enterprises and we've always been able to make it work, and work reliably.
A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info
UCS manager in HX is truly helping us in doing one touch firmware upgrades. Scaling of HX cluster (in few minutes) is too seamlessly due to service profiles.
HX does not hold you back by creating a single data store unlike other HCI products. With HX, you can create multiple data stores and allocate those to desired services. This help logically separate the install base on HX and removes confusion for the admins too.
We run high IOPs workload on HX, and we never felt latency issues due to the Cisco backbone (as you get FI as a TOR switch and options to choose 10G or 40G speeds).
With HX you truly enjoy a single window support from Cisco including for the top of the rack switch (FI in HX case). In other HCI infra, you certainly have to bank on to network switch vendor for support and bring HCI and switch vendor at one pane for troubleshooting latency related issues.
While we increased our footprint on HX, we didn't added additional administrators to support the landscape. This was possible because of the simplicity in managing HX clusters.
With HX we had setup stretched cluster between two near site data centres. This is a unique proposition in HX (we have 2 nodes in each data centre) and data centre failover works absolutely seamless.
A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info
there is the problem with starting cluster where there are not outside DNS and NTP services so we need to workaround this with additional storage or hosting it on the local storage.. many clusters has internal DNS/NTP services not available from outside and they need to be hosted on the HX
there is not RBAC or user mgmt on the CVMs so it is difficult to not add full permission for the people responsible for just shutdown and power on the cluster
native snapshots support with ibm backup products
running from not the only last snapshot in all use cases
A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info
A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info
The software has been amazing. It has saved me a lot of headache in the past few years. Also, it's nice to knowing that if any of our current Synology devices were to die I can have an iSCSI system up and running very shortly. I didn't give a 10 score because I find their support to be rather slow and pedantic. They test many things when the answer is right in front of them. The compute sytem (not storage) we purchased from them came with pcie gen4 nvme's. They didn't work, but rather than believe me about the spec's in the motherboard manual saying the onboard was pcie3 ONLY they shipped me 2 replacements until I showed them an old pcie3 device worked just fine. The part that rather frustrated me was the machine was claimed to have been tested / burnt in. How can this be true if the server won't even boot up into the BIOS?
A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info
The software is fairly straight forward and if you mess up the network interfaces you can login locally at the console and fix any issues that you may have had with VLANS etc denying you network access. There was a little bit of annoying issues when setting up multiple network interface cards. Rather than keeping one interface setup with DHCP, when you add a second one with a new network it disables the first. Which makes it impossible to login again. However if you wait it will revert. I learned after works that you need to set up the network cards and then go back and setup the first one again and THEN test / apply. After that it was pretty good. The summary of the devices is very nice to. You get an accurate snapshot of how well your system is doing as soon as you login
More documentation is available now than when the product initially came out (which was an issue early on). Because it only supports UCS hardware, I think it does help with support issues. Nutanix has to support much more hardware. At the same time, you're dealing with the Cisco TAC, which can be mixed at times.
A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info
The support was responsive for opening cases. However I found solutions to simple problems took far too long. When we had a bad power supply and we had another with the exact same firmware version they should have sent replacement for both. We had to file another case for the other PSU that started dyeing the same week. They also had to do a lot of troubleshooting to replace the fans that were not behaving as they should. I'm not a home user. I know when certain things are failing and the silly hoops the jump through made it frustrating. However, once we finally got the problem identified we had parts shipped out via advance replacement which was nice.
A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info
The implementation went well after we got the boot drive working properly. The device was setup exactly as i asked with the hardware except for the boot drive. The reason I chose 9 instead of 10 was the boot drive put us back about a week for the part to arrive. I ended up using a personal drive to show them that they were wrong sending use the gen4 drives.
HyperFlex is built on top of Cisco UCS infrastructure, which allows us to manage other non-HX servers attached to the same UCS environment. This allows us to tie everything together via Intersight and see all of the servers in our data centers. Other platforms don't really have a comparable offering.
A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info
I chose TrueNAS (upgrading from FreeNAS) because of the small footprint, ease of use, and reliability of the ZFS file system. The file sharing protocols supported as well as the intuitive interface all make TrueNAS a great choice for business and hobbyists alike.
The simplified management makes it easier to operate and prevents mistakes.
Guided installation using the installer VM means you don't have to configure every component by hand. Improves deployment speed and lowers the risk of configuration issues.
Performance increase of 40-90% compared to our previous compute/storage cluster.
Using a TruNAS integrated solution has reduced support overhead compared to using custom hardware.
Being cheaper than full flash storage arrays, this unit allows for a good balance of speed with its use of SSD-based caching drives.
The reliability of the hardware/software integration means I spend less time troubleshooting and more time doing business. Coming from a custom-built solution it is apparent that IX Systems has done some extensive testing.
