DraftSight vs. Studio 5000

2D design work

3D design work

Large area (500m²+) analysis and assessment

From product design, including production drawings to lay out of large (10m x 1m footprint) layouts DraftSight is a cost effective solution providing all appropriate interfaces for BIM.

The level of detail during rendering (while it can be slow) is good for visualization and for use in installation and training materials

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

As I said before, it's the only tool known to man capable of programming Rockwell PLC's, so if any colleague needed to program one I 100% would recommend it. So, this software is appropiate only when using Rockwell PLC's. As far as I know it would program any other brand.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• You can easily bring in a dwg format drawing into the programme and it will display the information just as well as AutoCAD.
• The programme supports shortcut features or one-click buttons for the most commonly used operations.
• Script files can be used which is a bonus.

Incentivized

Invited by the Vendor

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• The tag system it uses for programming makes it easier than other softwares
• Programming Rockwell PLC's
• The management of the ladder code is easier

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• The text search and replace is very crude and barely works. Needs a major revamping.
• The layout tabs are very clunky and hard to use. Needs to be fixed.
• DraftSight will fix a problem in one version, mess it up in another version, then fix it again later on. And so forth, and so forth, and so forth. Very poor software update control.

Incentivized

Invited by the Vendor

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Price, it's realy expensive
• Sometimes configuring communication with other devices can be hard
• I'd like the ability to programm with languages such as C or Python

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

It has given us, a small startup, the ability to compete effectively with far larger competitors by evening the playing field at a low cost.

Incentivized

Invited by the Vendor

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

Easy if you know how to use CAD software. But is not very difficult to learn using DraftSight if this is your first CAD software. As soon as you get in to it the work flow will save you a lot of time and its simple interface is very nice.

Incentivized

Invited by TrustRadius (TR) on Vendor's Behalf

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

Other than a bug created by a VAR tech support that didn't get resolved until I installed the next version, DraftSight has worked fine.

In general it's very quick to load drawings...now it depends a lot on the file we're opening or working on.

Incentivized

Invited by the Vendor

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

Technical support seems to be overseas with broken English and difficulty to read English. I asked for a trial license to try the fix but it was declined. Ask pratiksha.dahotre and gayatri.keskar for details. In summary, they released a broken version, I helped to fix by providing feedback and error logs. They claimed it is fixed but I can't test it.

Based on some knowledge of AutoCad, using Draftsight took a short time before I felt comfortable using it.

Incentivized

Invited by the Vendor

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

Take time to get used to where commands are and how the interface can be customized to suit your needs and work style. The keyboard commands are very helpful and can make work more efficient if time is taken to learn them.

Incentivized

Invited by the Vendor

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

While SketchUp is free, DraftSights cost is minimal and its abilities are much greater. It is so much easier to layout and modifies a system design. Since DraftSight is compatible with all versions of CAD, it makes it easy to collaborate with customers on their specific system design. We spend less time and see greater sales on our projects.

Studio 5000 is a good product. Compared to Omrom's CX-Programmer feels more advanced and with more functions, altough that depends on the PLC being programmed. I choose Studio 5000 because there are no other options when programming Rockwell PLC's

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

It's a typical contract for cad software. It was inexpensive at the time I started. But now the more useful features are on the more premium (priced) version.

As a startup, we really appreciate scalable software or tools, and because we use it for diverse types of projects, flexibility is key.

Incentivized

Invited by the Vendor

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

Quite responsive when I have an issue, and with little to no delay in responding. They are professional and know the software so have been able to solve all of the issues that I have had with both using the software and also with making revisions as required. Non-technical issues like invoices have also been resolved quickly.

Incentivized

Invited by the Vendor

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Draftsight has been very cost effective, it was free a few years ago then £79 a year, which it still is if you have the standard version. Now the minium level is Profession edition at £159+ VAT per year. Which is still very good value for money, just more that what we currently pay with the standard licences we have.

Incentivized

Invited by the Vendor

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Well, there is one customer that only uses Rockwells PLC's, so I could say that Studio 5000 is a must have and a good percent of the bussiness depends on it.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info