Onshape vs. Tacton Design Automation

Onshape shall be used by organizations where cost is a major factor as the license is relatively competitive than the competition. Where Onshape , excels the most is the ability to be operational on any device with internet connection and webbrowser. Onshape doesn't require your hardware to be beefed with Graphic cards (if added better). Where onshape can be better. If they are able to include simulation packages bundled like SOLIDWORKS.

Incentivized

Invited by the Vendor

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

For design automation for SOLIDWORKS, I feel Tacton Design Automation is the best solution out there. It's simple to develop and implement for the design/engineering department. But can be implemented within the sales team as well with Tacton CPQ. When a company has products that are modular and/or have many sizing updates, this is where Tacton excels. If you have products that are completely customized, then Tacton or even design automation isn't the best suited for that.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Cloud-based infrastructure and collaboration is a primary benefit.
• The available documentation is extremely thorough.
• The ability to integrate with other software for simulation, renderings, etc. is fantastic.
• Not having to save and being able to clearly see versions and change history is excellent.

Incentivized

Invited by the Vendor

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Tacton has a non-linear solver, meaning it can solve lots of equations without them being is a particular order. This enables the software to be incredibly flexible.
• Tacton has a great interface to set up configurators for people to use. No knowledge of programming languages is required. The configurator uses equations similar to Excel equations to control what the users options are.
• Tacton has the ability to easily add lists of data like product lists, beam or pipe sizes that because available for user selections or for calculations.
• The Tacton configurator also automatically builds the user interface as you set up user inputs making it much easier to set up then competitor software.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Dimensioning a hole feature in a drawing when there are multiple holes, the hole count does not parametrically update. For example, when there are 3x of the same hole, Onshape forces you to manually type in 3x instead of parametrically populating the hole count. This gets very dangerous if say, one of the 3x holes changes but you forget to update the 3x to 2x. Other CAD software does provide this.
• I know Onshape provides guidance on performance considerations and how to structure a project through their literature, however, a dedicated video from Onshape that directly addresses the guidelines on how to minimize file load and reload times would be beneficial to all future and current Onshape users. I think they should incorporate this directly in their training. Poindexter by Design went through the growing pains of this issue but through the Onshape literature and our own experiences we've developed guidelines on how to keep our Onshape performance maximized!

Incentivized

Invited by the Vendor

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Layout mode is probably the most lacking aspect of the software (within Tacon Design Automation Engineer). Something so powerful as having modular parts should be more heavily supported. Although, I've heard Tacton is focusing on updating this with better functionality.
• The constraint editor does not display complex/lengthy constraints very well. I end up using Excel to visually break out in cells the different aspects of the constraint.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

Familiarity and ability to work from any location. Also easy to cooperate with potential customers, existing customers, systems users, and fabricating shops. Most of the standard designs are now in On Shape and I would like to continue using it. It is easier to run versions to clarify imrovements to the previous designs

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

Onshape is great software and I have no trouble recommending it to CAD users and companies that need to do design work

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

Been fairly standard experience with support team. Issues have always been addressed, but is understandably focused on business side applications which typically has different issues than education applications. I have very few IT issues with the design side of the software, my issues are more often with the control of users and access

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

I might be biased by coming from using three different CAD softwares in the past, so I already understood many modeling concepts, but the training OS offers is really good. Videos are clear, they explain operations in good detail and besides that OS has a really good help system that explains even more how every tool works.

Incentivized

Invited by the Vendor

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

Onshape is revolutionary. Its advantage is that it can be used without having to download it. You are free to work wherever you want. This means that even if you take a vacation or attend a family event, your work will not be interrupted. You can still bring your work and complete it quickly.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

I have used SOLIDWORKS for over four years, and the vault system is time intensive for control of design history, and revision management. I have used Pro-E for over four years, and this has the capability but is not user-friendly. Not needing high-end computers is another great reason to choose Onshape

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

Drive Works is the main competitor for the TactonWorks module of Tacton. We actually discovered DriveWorks and purchased it before we discovered Tacton and started to use it. Once we discovered Tacton we liked it so much better we dropped using DriveWorks and switched to Tacton. I think you could accomplish what you need to in DriveWorks, but it is easier to setup in Tacton and Tacton has alot of features that really can make your product configurators nice

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Super fast idea to concept parts and prototypes
• So easy to share things with co-workers or higher management that I do it all the time
• No, IT support is needed so no IT cost and no hassle working with in-house IT and their way of doing things

Incentivized

Invited by the Vendor

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Time to produce submittals went from 1-2 weeks down to a couple of days. Then, once approved, normally to produce the fabrication drawings (70+ unique parts) it would take from 4-6 weeks. We can get it down to as little as a few days.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info