FogBugz vs. SOLIDWORKS

FogBugz has been a very useful tool to our organization, and much preferred over other options we reviewed, mainly JIRA. There are still some improvements needed, but with the fairly recent acquisition by DevFactory, we have a great deal of hope for what is in store given DevFactory's focus and transparency. It seems like both DevFactory and FogBugz customers are eager for substantial improvements on the front-end, but there is/was a great deal of backend housecleaning that definitely needed to take place first.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

As a mechanical engineer, it is one of the best tools to just start modeling and engineering with. The UI tools are intuitive and engineering analysis such Mold Analysis, FEA, are great! Other 3D CAD modeling tools have a longer learning curve to master. All in all, if you're not planning to design an entire airplane with large assembly files, then Solidworks is your tool!

Incentivized

Invited by TrustRadius (TR) on Vendor's Behalf

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. TR verified that a representative sample of customers was invited. More Info

• Tasks, Subtasks, and notes. All three of these areas were critical for our team. Tasks in Fogbugz were a bit easier to see than in more bug based software like Trello or JIRA
• The entire screen is used to view a task or case. Clicking on a task or case will open up and take up the entire screen, aside from the sidebar nav columns. I like to see details and I think Fogbugz does this very well, using up as much digital real estate as possible.
• Flowcharting in Fogbugz with Creately is nice - instead of getting an exterior flowchart software like Lucidchart, Creately works right in Fogbugz.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• The collaborative work environment is a cool and useful feature where groups of people can work on the same model at the same time, and SOLIDWORKS ensures that you don't overwrite each other's work.
• The ease and amount of customization options are very useful for creating a personalized and intuitive user interface, whether SOLIDWORKS is your native CAD package or not.
• It is very easy to quickly edit a model you have already created. The software allows sketch and feature editing without having to take the time to actually enter the sketch/feature environment.
• The use of configurations and configurations-specific dimensions in the same sketch is very useful for creating different forms of the same part

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• The simplicity of a single admin type user is not great because anyone who can create a job or client in the system, can also add and delete users. Content and User administrative rights should be separated.
• There are ways to change the terminology/lexicon within the tool, but we are not able to get it to work even after reaching out to tech support. So we are forced to use the system terminology that doesn't match up to our company making training a bit difficult.
• There is a subscribe function that you can opt into, there should be a way to add subscribers as you create a new task.

• Save DWG 2D files in inches or metric easily, defaults to metric and has to be manually converted to inches
• When using the sketch feature, the ability to disable ALL references. If I don't know the exact shape and I want to draw/adapt my design, it harshly interprets the references which have no value to me. The easiest exact is to think about when you have a Microsoft Word document that has a lot of formatting, photos, tabs, etc. If you accidentally hit the "enter" key, you can explode the formatting and everything goes crazy. SW does this to me, I just want to "doodle" my sketches, edit/delete/etc and not be bound by arbitrary references.
• For the sketch feature, ability to use a DraftSight plugin of some sort. I'm super fast in DS, if I could draw using the commands in SW then I would probably never open DS again and convert to SW full time. Currently, I only use SW as a way to convert 3D files so I can build everything in DraftSight.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

We have absolutely no reasons to not keep with SolidWorks for the foreseeable future.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

I have been using SOLIDWORKS for around 12 years as of writing this review, so have learned where most things are and how they work. When first starting out it was quite daunting, but the interface is well laid out with like functions near each other which made finding new functions relatively easy.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

We have an unusual arrangement. We don’t pay for support, but we’re partnered with a VAR for second-tier support.

I work with other users if I have questions but when we’ve had to ask the VAR, they always have answers. It appears that all of the VARs have access to a support platform from DS SOLIDWORKS that helps them answer most questions.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

I like JIRA a lot better than Fogbugz for many reasons. If I had a choice, I'd use JIRA every time

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

Onshape is a direct competitor. It has great entry level pricing and it is easy to access with no installation required. Being a web based app there is sometime some lag being based in NZ. Management also have concerns over where the data is stored on the cloud. With SW we can control where it is stored

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Saves time by quickly allowing Developers to make the necessary notes without getting bogged down in bloated UIs
• Has allowed us to look back easily and see the exact code changes made for the exact Case to aid in decisions for current changes, increasing the certainty of the decided path, without regression

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Creation of small 3D pieces to generate cash flow.
• Not being able to create 3D sculptures with this tool, and not being able to fulfill the client's requirements.
• To be able to sell high visual quality simulations for companies that hire the service.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info