Unfortunately, I have to give the edge to Pure and Nimble simply due to the availability of enterprise-grade hot-swappable redundant power supply units - as much as I love the TrueNAS hardware solution until that particular annoyance is addressed, I can't really consider these …
We purchased StoreVirtual appliances 6 months before they announced end of life - we were unable to expand our volumes due to product availability. We used this opportunity to look at different vendors since we needed to configure a new product anyway. Not only did TrueNAS …
HPE Nimble Hybrid storage is very cost effective that can provide the same Latency, I/O and Bandwidth compared with any other All FLASH storage which is 3 times expensive than this. From a feature comparison standpoint of view, there isn't much difference between Hybrid Vs ALL Flash. HPE Nimble Storage uses ALL Flash disk at the front end to process the data thus by reducing the cost by using a regular SAS disk at the back end. Its the software and the algorithm that HPE Nimble StorageE uses to achieve this. having said that, the overall data reduction, de-duplication and compression is above the mark as what the sales team promised initially. Overall, the storage is performing well without any challenges.
For a large, robust, well-secured, and stable storage system, TrueNAS is very well suited. Virtual Machine support is great. Shared filesystems (SMB, NFS, iSCSI, WebDav, AFP) are very well implemented. Time machine support is fantastic; security is very granular. Do not try to use it as a replacement for VMWare... (no migration, etc.)
HP Nimble is basically an all in one SAN with SSD cache or in some cases fully SSD based however the thing it does the best is its front end GUI and user management capability making it easy for anyone to ramp up on managing it quickly.
The Nimble SAN is also very easily managed when it comes to hardware management. Outside of some major internal parts such as the mainboard, almost everything in the system is duplicated so single failures never bring the system down. Power supplies and drives are easily swapped out.
Nimble has incredibly capable and easily accessible support that is available 24/7.
The price point on Nimble, though higher than piecing together a home made SAN out of spare Windows Servers, is perfect even for some SMB's.
I'd like the GUI to include more information for some of the features such as replication data totals each night. You have to go to the command line for this.
It would be nice to have a feature built into the GUI that would show you the command line equivalent to get the same results you are seeing in the GUI.
Although the intial setup was easy, they could always improve on that portion. During my setup, I did have to do a lot of back and forth with research on their site as to what each setting was that I was setting up. They could have provided some sort of description for each field within the setup that would have made it easier to know what they were having us set up.
Nimble is doing its job well and any issues that do come up cause the Nimble support team to alert us before we would potentially see an impact to our production environment. I do wish we could expand into the unused space in the CS210 shelf which is limited by what I assume is a marketing/sales strategy, but we will likely add shelves moving forward.
The software has been amazing. It has saved me a lot of headache in the past few years. Also, it's nice to knowing that if any of our current Synology devices were to die I can have an iSCSI system up and running very shortly. I didn't give a 10 score because I find their support to be rather slow and pedantic. They test many things when the answer is right in front of them. The compute sytem (not storage) we purchased from them came with pcie gen4 nvme's. They didn't work, but rather than believe me about the spec's in the motherboard manual saying the onboard was pcie3 ONLY they shipped me 2 replacements until I showed them an old pcie3 device worked just fine. The part that rather frustrated me was the machine was claimed to have been tested / burnt in. How can this be true if the server won't even boot up into the BIOS?
The software is fairly straight forward and if you mess up the network interfaces you can login locally at the console and fix any issues that you may have had with VLANS etc denying you network access. There was a little bit of annoying issues when setting up multiple network interface cards. Rather than keeping one interface setup with DHCP, when you add a second one with a new network it disables the first. Which makes it impossible to login again. However if you wait it will revert. I learned after works that you need to set up the network cards and then go back and setup the first one again and THEN test / apply. After that it was pretty good. The summary of the devices is very nice to. You get an accurate snapshot of how well your system is doing as soon as you login
Any time I have had to contact support, they have always been quick to respond, and very efficient in resolving any issues. When an action has been required on our side for a fix, they have been very helpful in explaining step by step what was required, and when replacement parts have been needed, we've had them within 24 hours.
The support was responsive for opening cases. However I found solutions to simple problems took far too long. When we had a bad power supply and we had another with the exact same firmware version they should have sent replacement for both. We had to file another case for the other PSU that started dyeing the same week. They also had to do a lot of troubleshooting to replace the fans that were not behaving as they should. I'm not a home user. I know when certain things are failing and the silly hoops the jump through made it frustrating. However, once we finally got the problem identified we had parts shipped out via advance replacement which was nice.
The implementation went well after we got the boot drive working properly. The device was setup exactly as i asked with the hardware except for the boot drive. The reason I chose 9 instead of 10 was the boot drive put us back about a week for the part to arrive. I ended up using a personal drive to show them that they were wrong sending use the gen4 drives.
We used a Dell EqualLogic PS Series storage array for many years and it worked well. A big issue was that upgrading firmware required system downtime and during one upgrade I was unable to bring the systems back up afterwards. I spent several days on the phone over a holiday weekend with Dell and VMware support in order to get my systems back up and running. It made me very nervous about doing firmware upgrades after that.
Having a better, trusted filesystem to build upon makes a huge difference. I want to know that if something I've written is read, it was the thing I wrote. And if it can't be read, I want to know that soon and know how to repair it.
Using a TruNAS integrated solution has reduced support overhead compared to using custom hardware.
Being cheaper than full flash storage arrays, this unit allows for a good balance of speed with its use of SSD-based caching drives.
The reliability of the hardware/software integration means I spend less time troubleshooting and more time doing business. Coming from a custom-built solution it is apparent that IX Systems has done some extensive testing.
