OpenRoads Designer vs. Designcenter Solid Edge

ORD is really focused on modeling of roads infrastructure projects, but includes a few design workflows that are in other disciplines such as stormwater and drainage design and site modeling tools for developments. This is really handy because you don't need a third-party application that you have to transfer your design files over to to carry on with the project. Including LumenRT for free with ORD is by far the most helpful feature because of the visualisation capabilities which most software does not include. ORD is well-suited for what the name of the product says - designing roads. I wouldn't say there are any scenarios in road design that it is less appropriate for.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

Well Suited for:

• Integrated designs performed by multiple designers simultaneously (designs requiring a Product Lifecycle Management system);
• Designs requiring a high degree of parameterisation;
• Large companies where specific standards and best practices are applied to all models and drawings created.

Not Well Suited for:

• Personal use in designing one-off models and drawings;
• Small business use where very few of the expensive features are actually used.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Creating linear models, since the app is based on alignment models and templates to extrude along the alignment.
• Precise long section/profile along horizontal alignment. The app practically flatten the horizontal alignment for profile generation.
• Template control. Though the template creation takes a bit of effort to create due to the point rulings. However when done right allows the model to be specifically modified with use of functions like super-elevation, point control, widening, parametric etc.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• It has very good user interface in classic or ordered environment.
• In 2D or drafting, you can give any Geometric tolerancing and symbols to any dimension. There is a wide range of options available.
• You can convert any files in step file (.stp) and can open it in other designing applications easily.
• After converting 3D drawings in 2D you can make changes in 2D drawing by converting it in the draft. You can also add details like cross-sections and detailed view.
• You can directly make threads without creating holes.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Buggy at times and crashes
• Requires a lot of training to use the tools effectively
• Model management requires some work

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Being used to 2-key and 3-key commands from the keyboard, it would be nice if this was more robust in Solid Edge. The capability of programming keystroke commands exists in Solid Edge, but it would be more user friendly in that regard.
• Editing hatches can be a challenge.
• I'm not a fan of the ribbon bar, but that seems to be a feature across software platforms in Windows.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

We would not use ORD if is was not for clients' contract requirement to use ORD.

As mentioned previously, Siemens Solid Edge is not the most user-friendly of products at all. It requires intense training to make sure that the basics are understood, and after that, there are numerous other training interventions needed to be able to perform expert-level CAD functions. The GUI is not intuitive, as many other packages are, and the features built-in are not well defined. The process to use many of these features is counter-intuitive and requires a mind-shift.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

I have been involved with support and training of Solid Edge for 24 years. Given that I based my business model on support, and have been successful for all these years, I know excellent support. Siemens support for Solid Edge, "GTAC", is the definition of support for a product in every aspect.

ORD is a lot faster and a lot more modern than Civil 3D even though they're essentially the same product under different names (in terms of workflows). I find that the DGN file format used by ORD is far better than the DWG file format used by C3D because DGNs can contain much more information and multiple models per file. C3D is very heavy on memorizing keyboard inputs while ORD is a much more modern interface that relies mostly on using the mouse for inputs.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

FreeCAD is often better than Solid Edge 2021 when converting files, but I hope this changes with 2023 NX is overall more powerful, but that is to be expected (and you cant add it above because it is too short for whatever reason).

Incentivized

Invited by TrustRadius (TR) on Vendor's Behalf

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Drawing creation from model have speed up drawing delivery by 80%
• Model creation for linear project based on simple design speed up model delivery by 80%
• Capturing model change due to alignment change have help speed up change capture by 80%

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• It took about 20 hours of use to get the basics of Synchronous Technology, and with just a basic competency I was able to make useful changes to the design. One of those changes was impossible to do our other CAD program.
• My use lately has mostly been on personal time and self-driven, so learning other aspects and features of Solid Edge has been slower. Creating a drawing for a part required a few hours to learn and do the first time, but luckily there were YouTube videos for examples. With practice, I would expect the time to reflect what it takes in SolidWorks (about 30 minutes).

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info