Bentley Systems offers OpenRoads Designer, their civil engineering and design platform which replaces the former GEOPAK Civil Engineering Suite, InRoads, MX, and PowerCivil.
N/A
SOLIDWORKS
Score8.7 out of 10
N/A
Dassault Systemes offers SOLIDWORKS, a computer-aided design (CAD) system for education and manufacturing supporting 2D or 3D design, electrical design, simulations, and product development with collaboration tools.
ORD is really focused on modeling of roads infrastructure projects, but includes a few design workflows that are in other disciplines such as stormwater and drainage design and site modeling tools for developments. This is really handy because you don't need a third-party application that you have to transfer your design files over to to carry on with the project. Including LumenRT for free with ORD is by far the most helpful feature because of the visualisation capabilities which most software does not include. ORD is well-suited for what the name of the product says - designing roads. I wouldn't say there are any scenarios in road design that it is less appropriate for.
A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info
As a mechanical engineer, it is one of the best tools to just start modeling and engineering with. The UI tools are intuitive and engineering analysis such Mold Analysis, FEA, are great! Other 3D CAD modeling tools have a longer learning curve to master. All in all, if you're not planning to design an entire airplane with large assembly files, then Solidworks is your tool!
A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. TR verified that a representative sample of customers was invited. More Info
Creating linear models, since the app is based on alignment models and templates to extrude along the alignment.
Precise long section/profile along horizontal alignment. The app practically flatten the horizontal alignment for profile generation.
Template control. Though the template creation takes a bit of effort to create due to the point rulings. However when done right allows the model to be specifically modified with use of functions like super-elevation, point control, widening, parametric etc.
A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info
The collaborative work environment is a cool and useful feature where groups of people can work on the same model at the same time, and SOLIDWORKS ensures that you don't overwrite each other's work.
The ease and amount of customization options are very useful for creating a personalized and intuitive user interface, whether SOLIDWORKS is your native CAD package or not.
It is very easy to quickly edit a model you have already created. The software allows sketch and feature editing without having to take the time to actually enter the sketch/feature environment.
The use of configurations and configurations-specific dimensions in the same sketch is very useful for creating different forms of the same part
A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info
A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info
Save DWG 2D files in inches or metric easily, defaults to metric and has to be manually converted to inches
When using the sketch feature, the ability to disable ALL references. If I don't know the exact shape and I want to draw/adapt my design, it harshly interprets the references which have no value to me. The easiest exact is to think about when you have a Microsoft Word document that has a lot of formatting, photos, tabs, etc. If you accidentally hit the "enter" key, you can explode the formatting and everything goes crazy. SW does this to me, I just want to "doodle" my sketches, edit/delete/etc and not be bound by arbitrary references.
For the sketch feature, ability to use a DraftSight plugin of some sort. I'm super fast in DS, if I could draw using the commands in SW then I would probably never open DS again and convert to SW full time. Currently, I only use SW as a way to convert 3D files so I can build everything in DraftSight.
A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info
A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info
I have been using SOLIDWORKS for around 12 years as of writing this review, so have learned where most things are and how they work. When first starting out it was quite daunting, but the interface is well laid out with like functions near each other which made finding new functions relatively easy.
A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info
We have an unusual arrangement. We don’t pay for support, but we’re partnered with a VAR for second-tier support.
I work with other users if I have questions but when we’ve had to ask the VAR, they always have answers. It appears that all of the VARs have access to a support platform from DS SOLIDWORKS that helps them answer most questions.
A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info
ORD is a lot faster and a lot more modern than Civil 3D even though they're essentially the same product under different names (in terms of workflows). I find that the DGN file format used by ORD is far better than the DWG file format used by C3D because DGNs can contain much more information and multiple models per file. C3D is very heavy on memorizing keyboard inputs while ORD is a much more modern interface that relies mostly on using the mouse for inputs.
A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info
Onshape is a direct competitor. It has great entry level pricing and it is easy to access with no installation required. Being a web based app there is sometime some lag being based in NZ. Management also have concerns over where the data is stored on the cloud. With SW we can control where it is stored
A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info
A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info
A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info
