PTC Creo vs. Solid Edge

PTC Creo is great for assemblies that multiple users are collaborating on. Models can reference other models that someone in another department has released and when those models are changed, the referenced parts and assemblies are changed. These changes are very helpful when working on collaborative machine designs and comparing forging dies with the final parts.

Incentivized

Well Suited for:

• Integrated designs performed by multiple designers simultaneously (designs requiring a Product Lifecycle Management system);
• Designs requiring a high degree of parameterisation;
• Large companies where specific standards and best practices are applied to all models and drawings created.

Not Well Suited for:

• Personal use in designing one-off models and drawings;
• Small business use where very few of the expensive features are actually used.

Incentivized

• PTC Creo contains many advanced tools with better optimization for creating part models and other production related drawings.
• The initial concept designs can be done more adequately.
• The parameters of 2D drawings can be changed easily by editing the 3D model.
• The productivity can be increased by customized tools for modeling.

Incentivized

• It has very good user interface in classic or ordered environment.
• In 2D or drafting, you can give any Geometric tolerancing and symbols to any dimension. There is a wide range of options available.
• You can convert any files in step file (.stp) and can open it in other designing applications easily.
• After converting 3D drawings in 2D you can make changes in 2D drawing by converting it in the draft. You can also add details like cross-sections and detailed view.
• You can directly make threads without creating holes.

Incentivized

• No autosave
• No clear message if it has problems saving the file
• Not so easy to use
• In my experience, has a lot of things missing that other CAD already have in years
• In my experience, it's extremely easy to lose work/time

• Being used to 2-key and 3-key commands from the keyboard, it would be nice if this was more robust in Solid Edge. The capability of programming keystroke commands exists in Solid Edge, but it would be more user friendly in that regard.
• Editing hatches can be a challenge.
• I'm not a fan of the ribbon bar, but that seems to be a feature across software platforms in Windows.

Incentivized

As mentioned previously, Siemens Solid Edge is not the most user-friendly of products at all. It requires intense training to make sure that the basics are understood, and after that, there are numerous other training interventions needed to be able to perform expert-level CAD functions. The GUI is not intuitive, as many other packages are, and the features built-in are not well defined. The process to use many of these features is counter-intuitive and requires a mind-shift.

Incentivized

I liked the training manuals I used to learn some, as I didn’t have CAD background in college or before this job. My coworkers were able to share with me what they learned in PTC training and I was able to get support online and through reading.

Incentivized

I have been involved with support and training of Solid Edge for 24 years. Given that I based my business model on support, and have been successful for all these years, I know excellent support. Siemens support for Solid Edge, "GTAC", is the definition of support for a product in every aspect.

Learning curve of SOLIDWORKS is higher compared to Creo, however, stability and more design control is provided by Creo. Creo also have more robust and stable interfaces. For larger assemblies, Creo works better than SOLIDWORKS. New upgrades of Creo has given liberty to open different file data of different software without any file conversion. Creo costs comparable to SOLIDWORKS cost, with more capabilities.

Incentivized

FreeCAD is often better than Solid Edge 2021 when converting files, but I hope this changes with 2023 NX is overall more powerful, but that is to be expected (and you cant add it above because it is too short for whatever reason).

Incentivized

• Having PTC Creo as our primary tool positions us as forward thinking and creative in the eyes of our clients.
• PTC Creo constantly evolves in the ability to increase our productivity; new capabilities and features are added, which reduce our level of effort for some tasks.

Incentivized

• It took about 20 hours of use to get the basics of Synchronous Technology, and with just a basic competency I was able to make useful changes to the design. One of those changes was impossible to do our other CAD program.
• My use lately has mostly been on personal time and self-driven, so learning other aspects and features of Solid Edge has been slower. Creating a drawing for a part required a few hours to learn and do the first time, but luckily there were YouTube videos for examples. With practice, I would expect the time to reflect what it takes in SolidWorks (about 30 minutes).

Incentivized