The Cisco 5520 Series Wireless LAN Controller is a highly scalable, service-rich, resilient, and flexible platform that is ideal for medium-sized to large enterprise and campus deployments.
N/A
Cisco Aironet 2800 Series Access Points (discontinued)
Score 7.3 out of 10
N/A
Currently supported by Cisco, but no longer sold, Cisco recommends migration to the Cisco Catalyst 9100 Family of Access Points, which offer greater performance and flexibility.
N/A
Pricing
Cisco 5520 Wireless Controller
Cisco Aironet 2800 Series Access Points (discontinued)
Editions & Modules
No answers on this topic
No answers on this topic
Offerings
Pricing Offerings
Cisco 5520 Wireless Controller
Cisco Aironet 2800 Series Access Points (discontinued)
Cisco Aironet 2800 Series Access Points (discontinued)
Likelihood to Recommend
Cisco
At this point the Cisco 5520 Wireless Controllers are end of life as a Cisco product, so I would not recommend them to anyone looking to purchase a wireless controller for an enterprise. However, many people are still using these, and they do work reliably, even if they are a bit long in the tooth now.
Cisco Aironet 2800 Series Access Points is very well suited for large enterprises and high-density environments. It is not well suited for high ceiling buildings like warehouses and storage places because of low antenna gain. In our main office, it is working very well. For around thirty or so wireless devices this access point works very well and after forty or so wireless devices it starts to suffer.
We have had some issues with access points losing their configurations and going offline. This is not a common issue and we are not entirely certain if it is a fault of the controller or the individual APs. That said, the controller does not appear to retain the knowledge of the offline AP which can be a management headache.
GPS Tracker - I can't understand why only the Cisco 1570 has this option as well as larger Cisco 3800 APs. Why can't this be in all APs so they can be easily mapped in Google for positioning and later plotted for the coverage zone.
This equipment from Cisco has been dependable and we are able to easily continue to add access points or make changes easily to the Wi-Fi password settings.
We have been operating this equipment for a number of years and it does not give us any issues.
Because until now I haven't had any issues or cases where I needed to create a ticket with Tac from Cisco related to their performance or availability. They have a small size that permits or allows you to install it in each place that you need to mount it, their design is small and appropriate for every kind of office.
Overall the usability is ok. The centralized management reduces complexibility and offers bulk features like adding access points to specific groups which automatically applies linked configurations.
On the other hand the GUI is very outdated and some features are not displayed correctly on new browsers. Also automation possibilities are very limited compared to the new 9800 series controller.
Lately we had less issues. Most probably because we reduced the number of Wireless LAN controllers. So less trouble for upgrades as well. We don't have any access point in stand alone mode. It's something I don't suggest, unless it's just for a small office and not for a larger company with different sites.
This access point does not usually randomly shut off. It can't happen but it's generally due to a power over ethernet failures which would could be considered a user error.
Performance wise [Cisco Aironet 2800 Series Access Points] are among of the best pieces of technology we have on premise. I don't say that lightly, we have a lot of cool tech. But if you consider how many users are connecting to these day in and day out without a single blip when they're downloading large files, roaming to new AP's or needing a boosted signal at a far end of the range then these are unmatched.
Cisco support is always ready to support and engage in any problem or issue. Starting from the implementation support, troubleshooting any software issue or hardware. Their engineers are engaging whenever we ask for support, keep following up with us, and troubleshoot any problem till we find a solution and be satisfied [with] the service.
Just take your time when setting up the HA pairs as those can be tricky. Also take your time setting up AP groups and make sure they are on all the SSIDs you need to be on.
Make sure to get a professional wireless assessment before purchasing AP's. That way you will only purchase what you need and know where the wiring infrastructure will need to be to streamline the installation and tuning process.
Cisco Identity Services Engine is well integrated on Cisco 5520 Wireless Controller because the WLC supports a lot of authentication methods and security protocols (such as PEAP, EAP-TLS, Captive Portal redirect). They perform very well with ISE. Cisco ISE is able to manage centrally the AAA sessions from all the WLCs keeping a central point of management for wireless infrastructure.
D-Link Wireless network solution was being used previously in [a] few areas of our plant and it was working well with [a] low number of users but as the company grew, and user base started to grow we started seeing hanging, disconnection, and very low-performance issues in our wireless network. We replaced the entire network with Cisco Aironet Access Points and since then the issues have been resolved and [the] wireless network is working with great performance.
When it comes to deploying the Cisco Aironet 2800 Series Access Points in locations around the school district it has become easier as you get used to putting 4 screws in the mounting plate to the bracket and then slide the access point onto the bracket.
Implementing the [Cisco] 5520 [Wireless] Controllers offered us a huge improvement in administrative time over our previous Cisco 3850 deployment. Being able to see all of our APs on a single controller as well as centrally manage them is a great benefit. This also removed the need to deploy specific equipment in different IDFs throughout our Industrial locations and instead only requiring switches with Power Over Ethernet (POE) capability.
Wireless performance has improved with the deployment of our 5520s, which allows our plant operators to do their jobs more efficiently while on the move.
Having three Cisco 5520 Wireless Controllers provides tertiary redundancy for our wireless networks. The solution is elegantly simple. Preventing downtime is, obviously, a profound part of our supply chain capabilities.