The Cisco Firepower 4100 Series’ 1-rack-unit size is presented by the vendodr as ideal at the Internet edge and in high-performance environments. They further state that it shows what’s happening on your network, detects attacks earlier so you can act faster, and reduces management complexity.
N/A
Cisco Secure Firewall
Score 8.0 out of 10
N/A
Cisco Secure Firewall (formerly Cisco Firepower NGFW) is a firewall product that integrates with other Cisco security offerings. It provides Advanced Malware protection, including sandboxing environments and DDoS mitigation. Cisco also offers a Next Generation Intrusion Prevention System, which provides security across cloud environments using techniques like internal network segmentation. The firewall can be managed locally, remotely, and via the cloud. The product is scalable to the scope of…
Manager Enterprise Systems & Networks Infrastructure
Chose Cisco Secure Firewall
I believe Cisco firewalls are definitely on par with Palo Alto but the latest AI feature releasing in 2024 will certainly surpass all expectations. Fortinet is going to struggle after this and I can say that with certainty given we have removed all our FortiGate firewalls.
When we are asked by local partners which security equipment we use we always recommend our Cisco security products. The Firepower firewall is no exception and we can easily recommend this to others who need a fast, secure, and well built system that integrates well with all your existing hardware and software.
Well suited any edge kind of protection, which is obviously, again, what firewalls really used for. Less suited if you need more detailed protection, more granular, shall I say it's a better word, more granular protection. The ability to filter not just on IPS and ports, but a much deeper look at the packets and do that.
It's been a big change for us because like I said, we've been using it about a year, I think. And we went from ASAs to this, so it was a big changeover from being able to do everything in CLI honestly, it's a bit clunky and more time consuming to have to configure things through the Gooey, which has been a pain point for us. But we've tried to automate as much as we can. What it does well is the analysis. The event, not event viewer, but unified event, that's what it is. Handy tool. Also the tunnel troubleshooting the site to site tunnel monitoring or troubleshooting, I can't remember what it's called. It's pretty good too. It's nice how it has some predefined commands in there. I'd say those are probably the things we like about it the most.
The failover process is clunky. When out Fortigate firewalls failed over, we lost 1 ping. When our Firepowers failover, whether it is on purpose or not, we experience a 2.5 minute complete outage.
Cisco could stand to improve their support documentation. I have found it difficult to find good directions for configuring these, especially when it comes to NAT and IPSEC tunnels.
I have one argument, failover scenario. It's not quite easy. Failover scenario of firewalls. It's sometimes not quite easy to know the issue. But if we open a tech case, a technical case to Cisco, Cisco will help us, it's a little bit con, but we are happy with this product.
It works really well. We can do most anything we want or need to with it, and you don’t have to have a doctorate or multiple certs to necessarily figure it out. The thing that would probably have to happen to make us switch would be if we just got priced out - Cisco’s more powerful and higher bandwidth models cost a pretty penny.
In general, the Cisco Firepower 4100 Series works well, great performance, support a high volume of traffic, configuration, users, the device is powerful and once you have something configured you can be sure that it will rarely fail but for day to day troubleshooting or modifications needed can be a little complicated due to you have to deploy every change you make in the device and is not as fast as other devices, in general a deploy takes 5 minutes.
Solution is highly effective, offers a lot of features with constant improvements and additions of new features over time. It's relatively easy to get familiar with the system, especially if transitioning from adaptive security appliances. If this is not the case, as for learnability there's a learning curve but once learned it is relatively easy to remember the details about the system even after a period of non-use
We have had really good success with Cisco Secure Firewall when it comes to availability. Even when we’ve had temporary issues with one appliance or the other, or with the Firewall Management Center, it has stayed up and defended our network diligently. We even had an issue where the licensing got disabled for multiple days, and it kept spinning like a top
Cisco support is not at all suitable for this product, at least. It takes a long for them to help us with our server issues. A lot of the time, the customer support person keeps on redirecting calls to another person. They need to be well versed with the terminologies of the product they are supporting us with. Support needs a lot of improvement. Cisco Fire Linux OS, the operating system behind Cisco Firepower NGFW (formerly Sourcefire), also doesn't receive regular patches. In short, average customer service.
was a good training but questions was answered not so good. Training was "Fundamentals of Cisco Firewall Threat Defense and Intrusion Prevention (SFWIPF)".
In the beginning transition from Adaptive Security Appliance to Cisco Secure Firewall did not look like the best choice. Solution was new, there were a lot of bugs and unsupported features and the actual execution in the form of configuration via Firepower Management Center was extremely slow. Compare configuring a feature via CLI on ASA in a manner of seconds (copy/paste) to deployment via FMC to Secure Firewall which took approx. 10 mins (no exaggeration). Today, situation is a bit different, overall solution looks much more stable and faster then it was but there's still room for improvement.
Cisco Firepower 4100 Series deployment is straightforward and easy to implement. It is also can support high availability and able to achieve redundancy. Besides, firmware upgrade is quite simple and the process does not take much effort as the upgrade will be automatically done by itself. Cisco Firepower 4100 Series is also very cost effective compared with other similar ranges of firewalls.
I think the Cisco product is probably pretty much equal now. I would love to say that Cisco is way more advanced or whatever, but Palo Alto, they just focus solely really on firewalls. And before Cisco came out with the FTD, the ASAs would only do layer four. So that's one of the reasons why that we purchased the Palo Alto is because they would do layer seven. And when we went to the FTDs, since they do layer seven as well, we just wanted to have different layers of security with our firewalls. So we just put the Palo Altos behind the Ciscos in case that there was anything that the Ciscos didn't catch, the Palo Altos would.
Some patching for zero day exploits have resulted in bugs causing downtime, meaning decision between vuln patching or risk of downtime needs to be discussed.
Peace of mind that the device will receive continued upgrades and with a quick turnaround.
Ability to use TAC for issues.
Ease of hiring candidates with experience in product line.
