The Juniper AP Series Access Points work in conjunction with the Juniper Mist Cloud Architecture and Mist AI to collect and analyze metadata in near real-time from all wireless clients. This is to enable rapid problem detection and root cause identification with predictive recommendations and proactive correction realizing the self-driving network.
I believe that Cisco Wireless LAN Controllers are well suited for the enterprise environment for medium sized to very large companies. While there are smaller WLC appliances for smaller sized businesses, a case can be made for simpler or more cost effective wireless licensing solutions (e.g. Cisco Meraki). Cisco Wireless LAN Controllers are extremely well suited for dense deployments like stadiums, arenas, hospitals, theaters, and large offices because of their ability to support a large number of APs with a very diverse technology feature set.
The Mist portal-controlled Juniper APs are great in an environment where clients are relatively stationary. Coverage is fantastic, and throughput is really good. I would be more concerned about placing these in a distribution-type warehouse where clients frequently roam between APs. While I've not had any issues, I could see where some APs might become sticky due to the cloud-controlled nature. In my experience, a local controller would be better suited to environments like that. I'm also concerned that support and quality may suffer due to the HPE merger.
Configuring wireless settings is very confusing because various settings are scattered all over the interface in different tabs
Lots of settings use Cisco's technical verbiage rather than common phrasing, so it's confusing what a lot of settings will do and requires researching the meaning before modifying the setting
The interface could be easier to use to do simple tasks such as reboot an access point
Although it is a very good product, support is easy and can manage by Level 1 support persons and downtime is too much less but still there is a cost factor matters which is consider by each organization. Furthermore, organizations also compare with other competitors so it is hard to pursue and defend the high prices.
As I said before, the only thing we miss in our old model is the fact that the management interface never received an improvement in design. It has the same look and feels since it was launched. It's not that it's hard to use. It's just the case of could be modernized.
We used a reseller to help set up and initially manage the Juniper APs. Templates are set up and deployed to sites, and at first, it may seem complicated, with a slight learning curve. Once created and deployed, the overall management and usability are great. In summary, the initial setup takes some advanced knowledge of the Cloud Dashboard setup with templates. After that, it's easy to use and manage moving forward.
Downtime fear is the first fear which IT persons look and want to eliminate as much as they can but eventually you have to face it as nothing is perfect. Cisco Wireless Lan controller are feasible to use and easy to manage and other than this their issue reported are pretty low so you can get the best up time. now it also depends on scenario as well as environment.
Cisco Wireless Lan controller are feasible to use and easy to manage and other than this their issue reported are pretty low so you get the better uptime. if your get the uptime then it means its a stable product in your environment. Product performance also depends on the product management and Cisco Wireless Lan controller management is easy so you can get the great output.
As usual, the support from Cisco's TAC (Technical Assistance Center) is lacking. Granted, they always get the job done, but the amount of lead time on a non-emergency is enough to make you just handle it yourself. The good news is that if you ask for Cisco's assistance and forget about it, they'll jump on by the time you've forgotten where you were in troubleshooting it and have it fixed for you.
Originally, when we deployed our first controller it was on a very limited basis. We only deployed it to our administration building and our High School. It was pretty straight forward. Because this was new to us we leaned heavily on our Cisco partner to assist us. With our last upgrade, we upgraded the controllers, added redundancy and expanded the building count along with new SSID's and restrictions. It went much easier, but again, we did rely on Cisco TAC and our partner to clarify and assist as needed. Having already been familiar with the product help tremendously.
The Aironet access points are used for employee WiFi access, and they integrate well with Meraki. They would offer a separate guest network, too, but the decision was made to physically separate the guest network, so even if a bad actor would gain access to the ethernet port of the AP, they'd still not see any company traffic.
Cisco is a brand name and people trust on it. if any one thing about the networking then Cisco is among those brand which is count as trusted brand and people rely on it. Also it support is good so people can use it. Cisco Wireless Lan controller are easy to use and manage so it requires less effort.
We have had our [Cisco Wireless LAN Controller] 5508s for a very long time now and although they are getting dated, they have earned us our money's worth with consistency, stability, and ease of use. Users have minimal wireless complaints and when they do seldom are they WLC-related.
