FreeCAD vs. Onshape vs. OpenBOM

I see FreeCad as the perfect solution for a startup with limited resources that want to save as much as possible and doesn't mind using non-standard 3D CAD software, i.e., it's not required by customers to use specific software for compatibility. It's perfect for hobbyist use and makers who don't care about brands and pay monthly fees. I see it as very well suited for small businesses that need FEA (finite element analysis) and can't/don't want to pay huge amounts of money for it, just like us. I see FreeCad as less appropriate for big corporations or well-established businesses that need standardized solutions, compatibility with clients or good version management. Don't get me wrong, it can get the job done, but it will be much slower than state-of-the-art CAD systems.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

Onshape shall be used by organizations where cost is a major factor as the license is relatively competitive than the competition. Where Onshape , excels the most is the ability to be operational on any device with internet connection and webbrowser. Onshape doesn't require your hardware to be beefed with Graphic cards (if added better). Where onshape can be better. If they are able to include simulation packages bundled like SOLIDWORKS.

Incentivized

Invited by the Vendor

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

OpenBOM is well suited for users who require the ability to have a "structured sandbox" when it comes to part, BOM, and vendor management. By having this structure, it allows for consistent capturing of key information, in a structured way, while also being dynamic where approved users can modify the information without too much overhead. We're using it for a medical device.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Importing CAD formats
• Converting mesh formats to solid and surface objects geometry
• Fixing errors in geometry cad

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Cloud-based infrastructure and collaboration is a primary benefit.
• The available documentation is extremely thorough.
• The ability to integrate with other software for simulation, renderings, etc. is fantastic.
• Not having to save and being able to clearly see versions and change history is excellent.

Incentivized

Invited by the Vendor

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• E-BOM management with an intuitive interface.
• Import/export from/to popular systems.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Overall, the UI feels very old and non-polished.
• There are some quirky behaviors, like being unable to select a plane by having the cursor over it; it has to be over the edges of the plane.
• It's overwhelming having those many modules and options for doing things that appear to be similar.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Dimensioning a hole feature in a drawing when there are multiple holes, the hole count does not parametrically update. For example, when there are 3x of the same hole, Onshape forces you to manually type in 3x instead of parametrically populating the hole count. This gets very dangerous if say, one of the 3x holes changes but you forget to update the 3x to 2x. Other CAD software does provide this.
• I know Onshape provides guidance on performance considerations and how to structure a project through their literature, however, a dedicated video from Onshape that directly addresses the guidelines on how to minimize file load and reload times would be beneficial to all future and current Onshape users. I think they should incorporate this directly in their training. Poindexter by Design went through the growing pains of this issue but through the Onshape literature and our own experiences we've developed guidelines on how to keep our Onshape performance maximized!

Incentivized

Invited by the Vendor

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Consistent log-off/ log-ins required (despite saying stay logged in)
• Default "custom use" of fields (vs. requiring the user to check this each time a new parameter is selected).

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

Familiarity and ability to work from any location. Also easy to cooperate with potential customers, existing customers, systems users, and fabricating shops. Most of the standard designs are now in On Shape and I would like to continue using it. It is easier to run versions to clarify imrovements to the previous designs

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

Usability is awkward. Perhaps if you learn it as your first CAD, it will feel OK. Still, it comes from commercial CAD products like mine (Onshape, Solid Works, Inventor, Solid Edge). You will feel it is less intuitive, with a less polished UI, difficult to customize and, this is a subjective one, less serious. I'd love to see it improve the usability and UI. I believe the engine behind it is powerful, but how you interact with the software is still lacking.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

Onshape is great software and I have no trouble recommending it to CAD users and companies that need to do design work

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

Been fairly standard experience with support team. Issues have always been addressed, but is understandably focused on business side applications which typically has different issues than education applications. I have very few IT issues with the design side of the software, my issues are more often with the control of users and access

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

I might be biased by coming from using three different CAD softwares in the past, so I already understood many modeling concepts, but the training OS offers is really good. Videos are clear, they explain operations in good detail and besides that OS has a really good help system that explains even more how every tool works.

Incentivized

Invited by the Vendor

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

Onshape is revolutionary. Its advantage is that it can be used without having to download it. You are free to work wherever you want. This means that even if you take a vacation or attend a family event, your work will not be interrupted. You can still bring your work and complete it quickly.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

Freecad is used often when receiving files from multiple sources and the need to work with cad in various forms from meshes to solid cad. Often when receiving scans of 3d objects the format is easy to work with and convert to traditional cad later on. There is no other cad that can bridge the gap between all the cad formats that we found yet.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

I have used SOLIDWORKS for over four years, and the vault system is time intensive for control of design history, and revision management. I have used Pro-E for over four years, and this has the capability but is not user-friendly. Not needing high-end computers is another great reason to choose Onshape

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

-We selected for ease of use and ease of implementation -We wanted to keep our overhead low -We wanted to track some inventory and this was helpful for that in a lightweight manner

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• It has allowed us to do some cad work that no other systems has allowed us to do and is key to getting that done fast
• It has lots of online support through forums and blogs for trouble shooting
• It could have an updated interface to make the functionality more user friendly for first time users

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Super fast idea to concept parts and prototypes
• So easy to share things with co-workers or higher management that I do it all the time
• No, IT support is needed so no IT cost and no hassle working with in-house IT and their way of doing things

Incentivized

Invited by the Vendor

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• We are yet to establish the ROI at a given subscription tier and compare it to other similar-priced solutions.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info