Revit vs. Solid Edge

Revit is well suited for creating collaborative projects that are fully integrated into the design and construction document process. We work a lot with engineering firms who also use Revit and the program allows us to fully integrate and coordinate our models together to make sure that everything is correct. I can see where my electrical engineer has placed lighting into the model and same with my mechanical engineer and their HVAC equipment

Incentivized

Well Suited for:

• Integrated designs performed by multiple designers simultaneously (designs requiring a Product Lifecycle Management system);
• Designs requiring a high degree of parameterisation;
• Large companies where specific standards and best practices are applied to all models and drawings created.

Not Well Suited for:

• Personal use in designing one-off models and drawings;
• Small business use where very few of the expensive features are actually used.

Incentivized

• 3D Models - It's kind of a no brainer, but the key benefit of Revit is its ability to model in 3D. It's a somewhat complex modeling environment, however, it's not impossible to learn and I have seen users from a range of abilities to effectively model content in Revit.
• Schedules - 3D is great, but the ability to quantify your geometry is contains valuable data if modeled correctly. If you model how you will build it, Revit has the ability to give very accurate schedules which includes quantities, and any data you would like to incorporate into your model.
• Industry Standard - Revit is the industry standard. With that being said, it really help to use software that is compatible with other agencies for collaborative model review.

Incentivized

• It has very good user interface in classic or ordered environment.
• In 2D or drafting, you can give any Geometric tolerancing and symbols to any dimension. There is a wide range of options available.
• You can convert any files in step file (.stp) and can open it in other designing applications easily.
• After converting 3D drawings in 2D you can make changes in 2D drawing by converting it in the draft. You can also add details like cross-sections and detailed view.
• You can directly make threads without creating holes.

Incentivized

• There are often several ways to draw certain things, but the object will have different capabilities based on the way it is drawn. This can be confusing when trying to use the object.
• The way objects are drawn is not always user-friendly. This program would be difficult for someone to figure out on their own without having any Autodesk background.
• There should be a better way to track changes in the model. Often times the architect will not share a model during construction to avoid sending changes that aren't finalized or complete.

Incentivized

• Being used to 2-key and 3-key commands from the keyboard, it would be nice if this was more robust in Solid Edge. The capability of programming keystroke commands exists in Solid Edge, but it would be more user friendly in that regard.
• Editing hatches can be a challenge.
• I'm not a fan of the ribbon bar, but that seems to be a feature across software platforms in Windows.

Incentivized

We will almost certainly be renewing all of our current seats of Revit and will likely be adding seats as we look to get more and more of our staff trained and using Revit. The software is starting to become the standard for our projects as we move forward as more and more of our clients are requesting or accepting use of it

Incentivized

It is a professional environment, but far from easy and overly complex in many places. The system is often too deep in settings and overrides (see Visibility/Graphics in combination with linked files, filters, color overrides and view templates). I don't really like the dialog-in-dialog interface and its spartan looks. But it works well overall if you know what you are doing.

Incentivized

As mentioned previously, Siemens Solid Edge is not the most user-friendly of products at all. It requires intense training to make sure that the basics are understood, and after that, there are numerous other training interventions needed to be able to perform expert-level CAD functions. The GUI is not intuitive, as many other packages are, and the features built-in are not well defined. The process to use many of these features is counter-intuitive and requires a mind-shift.

Incentivized

Revit seems to always be available when I need it. I have not experiences an outage. There are occasions where we need our internal IT department to trouble shoot a file on our Revit dedicated server and that sometimes causes a delay however that is not a software access issue

Incentivized

Revit is a fairly graphics heavy piece of software. It is powerful in its capabilities but as a result it takes a lot of the graphics card, the memory, etc. For all that it can do and the specs of my computer I find it pretty good from a performance standpoint

Incentivized

Autodesk has always had a good support system in place. There is a massive user base for Revit, and there are thousands of forum threads and other discussions online about any and every problem that you could ever run into. For being such a large program with so many different options, there aren't many roadblocks or pitfalls that users can fall into.

Incentivized

I have been involved with support and training of Solid Edge for 24 years. Given that I based my business model on support, and have been successful for all these years, I know excellent support. Siemens support for Solid Edge, "GTAC", is the definition of support for a product in every aspect.

The training was Revit Essentials and it was very beneficial. I would say that it is best to get the training right before you know you will be using Revit as learning the basis then applying what you learned immediately is the most effective and best value for your money.

Incentivized

The online training is hit or miss. I feel that its better to be live to be able to pace and ask questions to a live person as you are learning hwo to do things. Its not natural to learn Revit especially if you know AutoCAD so my suggestion is the live training

Incentivized

Implementing Revit as your main drafting software (i.e. moving to BIM from CAD) may be a tough decision if you have learned drafting. It is a different way to approach and think about developing a project. However, if you are able to adapt to a new way of thinking and get used to it by working through a few projects than it is as efficient as CAD in most areas in general and will also be both better/worse in some areas

Incentivized

Revit like AutoCAD can produce both a 3d model & 2 dimensional drawings such as plans, elevations & sections which are required for any design project to be communicated on paper for construction. But unlike AutoCAD, Revit's focus is to build a 3d model that contain smart information for construction. So for Revit the 2 dimensional drawings becomes a byproduct. In addition to the required drawings needed on paper to communicate the design, Revit offers so much more information in the model for all engineering disciplines.

Incentivized

FreeCAD is often better than Solid Edge 2021 when converting files, but I hope this changes with 2023 NX is overall more powerful, but that is to be expected (and you cant add it above because it is too short for whatever reason).

Incentivized

While I am not directly involved with the deployment of Revit, it seems that our internal IT department has appreciated the ability to increase or decrease the number of seats. I have never had an issue with the deployment if and when needed, especially regarding the availability of a set

Incentivized

• It's positive. It saves quite a bit of field time when used correctly, and lets us make sure we have proper room for all equipment and ductwork.
• Helping minimize field 'thinking' time is an immediate add to the bottom line. 1 guy designing on the front side saves down time of 5-10 guys waiting in the field. Cost savings on labor is apparent.
• Coordination time is also cut down, saving on office time. It's easy to spell out what your plan of attack is. All these savings directly add to bottom line profit by not expending labor.

Incentivized

• It took about 20 hours of use to get the basics of Synchronous Technology, and with just a basic competency I was able to make useful changes to the design. One of those changes was impossible to do our other CAD program.
• My use lately has mostly been on personal time and self-driven, so learning other aspects and features of Solid Edge has been slower. Creating a drawing for a part required a few hours to learn and do the first time, but luckily there were YouTube videos for examples. With practice, I would expect the time to reflect what it takes in SolidWorks (about 30 minutes).

Incentivized