Autodesk Inventor vs. Designcenter Solid Edge

Autodesk Inventor is a great tool for students and faculty for engineering areas that don't require great precision or development of more thorough scientific results. Is you are conducting research, or deal with very intricate and complex systems I would recommend a more robust platform that complies more to industry standards.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

Well Suited for:

• Integrated designs performed by multiple designers simultaneously (designs requiring a Product Lifecycle Management system);
• Designs requiring a high degree of parameterisation;
• Large companies where specific standards and best practices are applied to all models and drawings created.

Not Well Suited for:

• Personal use in designing one-off models and drawings;
• Small business use where very few of the expensive features are actually used.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• The program is very good at simplicity. Each of the buttons, menus, and options has an explanation of exactly what the feature does, and even a more advanced description if you desire to learn more about what each one does.
• Autodesk Inventor is a very fast program. Everything renders extremely quickly and there are no delays when examining a 3D model, part, or assembly. This is especially useful when giving a presentation about a product or design, and you need to be able to show a concept to an audience in real time.
• The software has an extremely accurate simulation feature that lets users do stress analysis on a 3D model. It can calculate precisely where the stress concentrations are going to be in a particular model and even give you an accurate depiction of where the part could likely fracture and/or fracture during loading.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• It has very good user interface in classic or ordered environment.
• In 2D or drafting, you can give any Geometric tolerancing and symbols to any dimension. There is a wide range of options available.
• You can convert any files in step file (.stp) and can open it in other designing applications easily.
• After converting 3D drawings in 2D you can make changes in 2D drawing by converting it in the draft. You can also add details like cross-sections and detailed view.
• You can directly make threads without creating holes.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• most if it still runs on a single core. Please fix this
• Crashes. In our experience, too many crashes. We have high end machines and crashes are way too common.
• Autosave. I think it is simply unacceptable that Autodesk Inventor combines common crashes with no autosave functionality. We feel this pain all the time.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Being used to 2-key and 3-key commands from the keyboard, it would be nice if this was more robust in Solid Edge. The capability of programming keystroke commands exists in Solid Edge, but it would be more user friendly in that regard.
• Editing hatches can be a challenge.
• I'm not a fan of the ribbon bar, but that seems to be a feature across software platforms in Windows.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

Inventor continues to meet our enterprise needs. I don't see a need to change unless we change our business model significantly.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

It is quite user-friendly as long as you have the computing power to download and use it. However, this makes it quite inconvenient if you are trying to access files on different devices, as Inventor has to be loaded on all of those devices. While the program itself works just fine, it would be much better for my application if it, or a version, were web-based and allowed users to access and modify projects from anywhere.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

As mentioned previously, Siemens Solid Edge is not the most user-friendly of products at all. It requires intense training to make sure that the basics are understood, and after that, there are numerous other training interventions needed to be able to perform expert-level CAD functions. The GUI is not intuitive, as many other packages are, and the features built-in are not well defined. The process to use many of these features is counter-intuitive and requires a mind-shift.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

I think the support for Autodesk Inventor is very good. The staff at our reseller were very knowledgable and able to walk us through problems pretty easily. The training we received was very good also. I will say that there were a couple of times we reached out to support with a question or challenge we had, and the support agent was not able to resolve our problem, and after touching base back we found out that there was not a solution for the problems we were experiencing. One of them was just how Inventor represents colors inconsistently at times, all things being equal. Another was that Inventor would not let decals on parts transcend to the assembly level. they just would not show up.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

I have been involved with support and training of Solid Edge for 24 years. Given that I based my business model on support, and have been successful for all these years, I know excellent support. Siemens support for Solid Edge, "GTAC", is the definition of support for a product in every aspect.

I got the training during college, so mostly i learned on my own

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

When it comes to solid modeling, the bad choices died out years ago. So we looked at the total ecosystem and chose Autodesk Inventor because of the integration with Nastran, HSM (machining), Autodesk CFD, MoldFlow, and AutoCAD. This means our legacy data (2D) is still a valid part of our design methodologies going forward, and we have the full breadth of engineering tools at our disposal. Other solutions in this space have similar offerings but not nearly as potent of a portfolio in total. It's worth saying that we do not consider Inventor in the same space as CATIA or NX, but that the entire Autodesk portfolio (e.g. Alias, PowerMill, etc) includes a total toolset that exceeds these industry giants.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

FreeCAD is often better than Solid Edge 2021 when converting files, but I hope this changes with 2023 NX is overall more powerful, but that is to be expected (and you cant add it above because it is too short for whatever reason).

Incentivized

Invited by TrustRadius (TR) on Vendor's Behalf

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Working on a project designed with Inventor provides a modular design platform that can quickly be configured or changed as required. This allows for the quick turn around time for the design and revision of drawings.
• We've used Inventor over the years (since 2013) and the updates and newly released versions of Inventor do not require re-training or restrict use.
• Autodesk follows an intuitive approach and users or designers who have worked on other design platforms like SolidWorks can transition easily to Inventor.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• It took about 20 hours of use to get the basics of Synchronous Technology, and with just a basic competency I was able to make useful changes to the design. One of those changes was impossible to do our other CAD program.
• My use lately has mostly been on personal time and self-driven, so learning other aspects and features of Solid Edge has been slower. Creating a drawing for a part required a few hours to learn and do the first time, but luckily there were YouTube videos for examples. With practice, I would expect the time to reflect what it takes in SolidWorks (about 30 minutes).

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info