AutoCAD vs. Studio 5000 vs. TurboCAD

Once again, for jobs/companies where you are doing a lot of design and modelling of tanks, pipework or filling machine or basic electronics its fantastic as a 3D and 2D modelling tool, however once again when it comes to testing these actual products in the real world, I feel like AutoCAD is let down by its clunky fitting and spec management and also in very limited in-house engineering simulations.

As I said before, it's the only tool known to man capable of programming Rockwell PLC's, so if any colleague needed to program one I 100% would recommend it. So, this software is appropiate only when using Rockwell PLC's. As far as I know it would program any other brand.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

TurboCAD is well suited to a smaller budget, it is by no means the best there is but for the money, it fills the gap. Being an AutoCAD & DraftSight user I find the user interface a little old and the lack of common drafting industry shortcut keys a bit of a hindrance. However this product, TurboCAD gets the job done, other packages like DraftSight do not even come with an active 3D option on the cheaper end, standard license whereas TurboCAD does, even though it's a little clumsy to use.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Compatibility of different file formats, and also exports to different file formats.
• CLI Commands as well as internal functions which are exposed can be used for automation of various tasks.
• The new 2025 comes with .NET Core support which helps AutoCAD to connect with Cloud based features.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• The tag system it uses for programming makes it easier than other softwares
• Programming Rockwell PLC's
• The management of the ladder code is easier

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Produces accurate drawings to scale, and with several ways to show the "views" to people in need of them at our factory.
• Relatively easy to use, once you understand the toolset. You can draw anything with it.
• Sending files to CNC machine shops to produce parts is easy with this program.
• Sending to mold making companies works out well. Just ask them what file format they want and TurboCAD can give it to them.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• User Interface Customisation: AutoCAD's user interface could benefit from more robust customisation options. Allowing users to rearrange toolbars, menus, and panels according to their specific workflows and preferences would enhance productivity.
• Enhanced 3D Modeling Tools: While AutoCAD is capable of 3D modeling, it's not as intuitive or feature-rich as dedicated 3D modeling software. Streamlining the process and adding more advanced modeling tools would be a welcome improvement.
• Enhanced Collaboration and Version Control: AutoCAD could improve its collaboration tools, such as real-time editing and version tracking, to facilitate smoother teamwork, especially in multi-disciplinary projects.
• Intelligent Object Libraries: AutoCAD could benefit from an expanded and more intelligent library of standard objects and components. This would save time for designers who often have to create custom components from scratch.

• Price, it's realy expensive
• Sometimes configuring communication with other devices can be hard
• I'd like the ability to programm with languages such as C or Python

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Some of the load times are lengthy is there a way to streamline this?
• Path Hatching and Object Trim could use a hot key
• More intuitive layer management system

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

Because rarely we [would] rather wait for a whole year to update, sometimes the new updates don't bring many new features and we are still ok with the current version. Also the change of interface is always something that takes time for every partner in the company to get comfortable with. So those are the main reasons we may want to keep the same version.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

It is very usable once you understand the program. I believe there is room for improvement in the 2D to 3D modeling capability. We have to use other apps to 3D model and that can be time consuming and sometimes AutoCAD doesn't transfer work that well between apps. They can improve there.

TurboCAD does all of the things we need it to do and some. The wide variety of options to create specificity in each of our projects is a large plus. The reason it was given a 9 is because the learning curve can be a little steep and sometimes certain processes are not as intuitive as they could be

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

AutoCAD has the issue of crashing or slowing down the design procedure once a heavy design that includes several disciplines or multiple families/blocks is involved. Customer services gets the feedback from the crash reports but this issue seems like it has never been addressed in the software updates past several years.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

the implementation was realy easy , to set up our workstation we pay for the licenses we are about to use , there was a little bit of delay to get the payment processed to receive the serial but after that the install runs without any problem , so you can fell secure there will be not issue with the implementation.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

I use Revit far more than I use AutoCAD. AutoCAD is great for simple linework, but even then I will often create the lines in Revit and then export to AutoCAD for final touches and printing. AutoCAD is a bit easier for large-format prints, which is why I almost always end up using it after starting in Revit.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

Studio 5000 is a good product. Compared to Omrom's CX-Programmer feels more advanced and with more functions, altough that depends on the PLC being programmed. I choose Studio 5000 because there are no other options when programming Rockwell PLC's

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

3DS Max is the one I use the most, the other two are good choices also. They have more online tutorials for helping learn them.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• As an educational institute there are no overall business objectives.
• As a negative, the licensing is expensive and we have to limit the number of computers we put it on.
• As a positive, many of our students will have a leg up when entering into programs or companies that use this software.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Well, there is one customer that only uses Rockwells PLC's, so I could say that Studio 5000 is a must have and a good percent of the bussiness depends on it.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Ability to render quotes.
• Ability to supply complete drawings.
• Easy to use interface provides a faster design time window.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info