Cisco ThousandEyes empowers organizations to assure every digital experience across every network, everywhere, every time.
N/A
PingPlotter
Score 8.8 out of 10
N/A
PingPlotter is a graphical traceroute and ping tool that visualizes network performance in a way that makes identifying the source of problems quicker and easier for everyone from online gamers and video streamers to VoIP admins and IT pros. Features for remote deployment, network monitoring, scripting, and a web interface are included along with several additional capabilities.
Offers better native integration with existing Cisco infrastructure.
So I would say what's sort of unique to ThousandEyes is that it also focuses on infrastructure that is not within the boundaries of your enterprise. That was one of the key reasons why we started using it—to …
It is a similar product to Cisco ThousandEyes. Both solutions give good network monitoring and traffic analysis. But Cisco ThousandEyes works better with Cisco devices and has real-time alerts that are very useful. It also helps to see network problems faster and make …
This technology helps us and our customers understand the value and importance of our business. Not only for our business but also for Cisco business. We are developing a lot of apps in .net so we will like to have support for that in Cisco products that we and our customers …
We did briefly look into DynaTrace, but it was too much product for what we needed though and was much more expensive then just adding the licensing to our Cisco existing licenses.
Juniper RPM offers device config level sla testing in the service stream layer. Whilst this is good and is monitorable via snmp, the config can be fiddly and needs a Juniper device at the other end as a reply point
I used Ping.app and UptimeLog.app on the Mac. These both provided different aspects. These two had a menubar to show me green or red for multiple connections. UptimeLog showed me very clearly when my connectivity was on or off and for exactly how long.
I've tried more products that are not in the list but PingPlotter is the easiest to use and the better one so far because of the interface and function.
PingPlotter has better visualizations and a stronger ability to capture historical data than other tools I've used. This makes it easier to find the root cause by looking back in the log data to find where latency or packet loss occurred.
A balance of a generic tool vs a network equipment product is necessary when investigating network incidents or disruptions. Need to train the engineer to use both tools to perform their analysis and to dive down to the issues as fast as they can. Experience with the tools will …
PingPlotter stacks up very well to Solarwinds NPM and can provide many of the same benchmark tests that Solarwinds can. PingPlotter is most certianly much better at doing Traceroutes than NPM, and you can run a lot of the same reports.
PingPlotter is a basic version of Auvik, although it is easier to setup and there is less intrusion in the customers network. This allows us to use PingPlotter as a prospecting tool and allows to accurately gather network information very quickly. Basic troubleshooting is great …
I have tried a few free products and some paid ones but never really did what I wanted. I just needed a simple, always-on link monitor specifically with a traceroute element and this is what PingPlotter delivers. The others were either overly complex or too expensive, some just …
It's a great tool for monitoring remote workers' connections. Great for monitoring the overall network. Routers, switches, collaboration, Cisco video endpoints, Great alerting tool that is built into Webex so that you receive alerts as things in your network happen. Great for monitoring connection to servers when you believe there could be latency or other issues.
It is well suited for performing monitoring and testing from a single device. It is less appropriate if you have to monitor from multiple different endpoints. That type of deployment would be more of an enterprise application. If you are looking for an end user monitoring solution then PingPlotter is the one for you.
Agent to Agent testing. Full round trip test. Have a customer using a Server Side API that is having an issue. Loan a Nuc, or have them install the ThousandEyes agent in their network. You'll find the issue guaranteed.
Device Layer vision - ability to see from the server, through the Firewall, switches Proxy and internet. Measure jitter, latency, response time, load time and see the path your packet takes.
Share your tests live. Provide the customer a link to a live test, they can see what you do, review your metrics and verify your tests. They can also use it as a tool to better their service. Build the trust and stickiness with your customers' most difficult users - the IT Operations team.
Validate your QOS and routes for VOIP, video conferences, and data traffic. Highly flexible and configurable complete with transaction-based testing, custom headers, calls and tools to mimic any scenario you need.
We have the product, we have a fair amount of wireless issues. You have to go through so many hoops, links and selections that I would think would've been impossible. Maybe if you have a specialized engineer, you would be able to use the thousandeyes product to troubleshoot a problem. But if I want to share with our knock, for example, would be very challenging because there is so many paths that you have to go and there is so many assumptions you have to do to actually find the root cause of the problem. What I would expect is maybe what they can do is implementing some AI today on this product to give some hints, "hey, this might be the problem because the data is there but it's difficult to find." We need an easier way to find how we can use the platform to point out where's the root cause of those problems.
Its a little confusing to see which targets are currently running pings and which ones are displayed in the plots.
Starting and stopping pings requires a right click and that would be better with a play/pause button I think.
Ability to drag and drop the graphs to reorder them.
more columns to show which targets are running and which are displayed. Currently this is done with symbols so you cant sort by just the running targets for example I've found.
We will definitely renew and maybe even extend our usage of ThousandEyes. We have been using ThousandEyes now for a couple of years and it has shown us major benefits. With the new options it offers for SD-WAN for us it is a no brainer to renew our current licenses
User-friendly interface with no technical experience, quite easy to go from broad view to dig down view to see where the issue resides - Most important for me is demarcation of the issue, is it us, network, customer, agent laptop?
I installed it and it just started working. I realized I could then tweak it to show what I needed but didn't have to spend a long time configuring it before use, editing YAML files etc. Maybe that's fine for a network professional, but I only need this software if something goes wrong, and then need it to work quickly out of the box.
You have online support from the tool itself 24/7 and they are very responsive. We also have a specific account manager and specific engineer assigned to help us with very specific questions for our environment. The level of response to our requirements is always super high. We have requested specific features to be added and these have been developed and introduced very quick tot he product (within weeks). Their DevOps and agile approach seems to pay off.
I have not had much contact with the PingPlotter support, only one time have I went to them and it was a positive experience. The questions I had were answered quickly and professionally. I have no issue with the experience I had with the Support team. This was from before and after the purchase of the product.
Our Cisco reps actually had someone teach us a few things about the functionality of ThousandEyes, and it helped a lot. The training was good and we had follow-up assistance as well when we had questions about the monitoring and reporting functions. Overall, we were satisfied with the training and support.
Our implementation was pretty straightforward, with some issues loading clients on endpoints. We didn't have any notable issues, and I don't really have any additional insights.
It is a similar product to Cisco ThousandEyes. Both solutions give good network monitoring and traffic analysis. But Cisco ThousandEyes works better with Cisco devices and has real-time alerts that are very useful. It also helps to see network problems faster and make troubleshooting easier. Cisco ThousandEyes is also better for checking SaaS and cloud apps like Azure, AWS, Webex, etc. It has endpoint agents that show network quality directly from user devices. The web interface is simple to use, so the learning curve is not too steep. Also, it has many monitoring points around the world, making it easy to check performance outside the company network.
I used Ping.app and UptimeLog.app on the Mac. These both provided different aspects. These two had a menubar to show me green or red for multiple connections. UptimeLog showed me very clearly when my connectivity was on or off and for exactly how long
I think this product would be infinitely scalable since it's all cloud hosted and can support thousands of endpoints if needed. We are only using it for a limited number of endpoints, so we never really considered scalability.
ThousandEyes has helped us quickly isolate issues on some high-profile (within the organization) incidents and whether the network (internally or on the Internet) is at fault. If it is, it becomes easier to see the "where" of the issues quicker so we can move onto what the issue is faster. In the case of non-network related issues, it helps us get the appropriate teams or individuals involved sooner.
