The Juniper AP Series Access Points work in conjunction with the Juniper Mist Cloud Architecture and Mist AI to collect and analyze metadata in near real-time from all wireless clients. This is to enable rapid problem detection and root cause identification with predictive recommendations and proactive correction realizing the self-driving network.
N/A
Juniper EX Series Switches
Score 9.2 out of 10
N/A
Juniper Networks offers the EX Series Ethernet switches, as cloud-grade switches designed for the converged enterprise branch, campus, and data center, and for service providers. They address growing enterprise demands for high availability, unified communications, and virtualization.
$1,680
one-time fee approx
Pricing
HPE Juniper Access Points
Juniper EX Series Switches
Editions & Modules
No answers on this topic
EX2300-C
$1680
one-time fee approx
EX4100-F-12P
$4,585.00
one-time fee approx
EX230
$5830
one-time fee approx
EX4100-24MP
$8,640.00
one-time fee approx
EX4100-F-48P
$8,665.00
one-time fee approx
EX4300-48P
$9,169.99
one-time fee approx
EX4400-24X-AFI
$9,824.99
one-time fee approx
EX3400-48P
$12,322.99
one-time fee approx
EX4400-24MP
$14,315.00
one-time fee approx
EX4400-48MP
$15,510.00
one-time fee approx
EX4600
$31,273.99
one-time fee approx
EX4650
$33,030.00
one-time fee approx
Offerings
Pricing Offerings
HPE Juniper Access Points
Juniper EX Series Switches
Free Trial
Yes
No
Free/Freemium Version
No
No
Premium Consulting/Integration Services
No
No
Entry-level Setup Fee
Optional
No setup fee
Additional Details
—
Pricing is dependent on type of switches and the vendor selling them.
I prefer Juniper. Configuring the extreme environment was odd and clunky. Three years after we deployed Extreme I got informed the virtual controller we were using was end of life. The APs were still good, just the controller was end of life. I had to deploy a new virtual …
Much easier to manage them and configure them. When we used Aruba central to manage the newer AP's, it seemed a little clunky and didn't always like the placement or what port it was connected to. Troubleshooting Juniper AP's is much easier with Mist over using Aruba Central. …
Juniper is much better than Cisco. Especially when it comes to price for performance. I can do the same thing with a Juniper switch and a Cisco switch at the same power-level. It cost much less to run the Juniper switch. I also have the Mist dashboard which provides incredible …
The Mist portal-controlled Juniper APs are great in an environment where clients are relatively stationary. Coverage is fantastic, and throughput is really good. I would be more concerned about placing these in a distribution-type warehouse where clients frequently roam between APs. While I've not had any issues, I could see where some APs might become sticky due to the cloud-controlled nature. In my experience, a local controller would be better suited to environments like that. I'm also concerned that support and quality may suffer due to the HPE merger.
They work great as core switches, data center switches, top of rack switches. They can even serve as routers, their routing capability is great, except for where you need lots of routing processing power. I would not use many of them for branch office switches though, due to noise and slowness of bootup
We used a reseller to help set up and initially manage the Juniper APs. Templates are set up and deployed to sites, and at first, it may seem complicated, with a slight learning curve. Once created and deployed, the overall management and usability are great. In summary, the initial setup takes some advanced knowledge of the Cloud Dashboard setup with templates. After that, it's easy to use and manage moving forward.
The Mist portal is extremely easy to use. I only have a few issues with it. The configuration between Mist and the CLI is not uniform. If you push some command line configurations to the switch, they won't be mirrored in Mist. You need to use the CLI portion on the switch config page to push some CLI only configurations. If you want to remove those lines, you need remember to do the inverse of the config. You need to make sure your juniper admins understand this as well. Simply removing the line from the CLI text box of the Mist page does not remove the config line from the switch itself.
When you open ticket, normally a L2 support engineer request support file and give you a valid fast solution. They replace switch if no solution are available due to minimize downtime
Juniper EX Switches are far more reliable than NETGEAR Ethernet Switches. The Juniper EX Series Switches offer a wider scope of options for configuration. The EX switches can be deployed faster and easier to configure. The Juniper EX Series Switches offer more value for their price point than most switches on the market, in my opinion
The Juniper EX Series Ethernet Switches have provided a life span beyond what our replacement cycle allots, which allows us to have more time to budget for replacements.
The initial purchase price is very competitive with other enterprise network switching companies.