MicroStation vs. OpenRoads Designer vs. SOLIDWORKS

MicroStation is THE program to use for roadway and corridor modeling. Most departments of transportation and municipalities in my region require that the models be delivered in the dgn format, so it is MicroStation or bust. It is an absolute pain to use some of the add-in features though. Things that are easy in other programs like making smart tables that update with the latest information usually necessitate the use of Axiom or similar outside programs/add-ins. I design storm sewer systems, and it takes us 6 months to train up new hires on this software, because it is NOT intuitive. You need to know which buttons to press, since it is not designed to be easily command-based like AutoCAD Civil 3D.

Incentivized

ORD is really focused on modeling of roads infrastructure projects, but includes a few design workflows that are in other disciplines such as stormwater and drainage design and site modeling tools for developments. This is really handy because you don't need a third-party application that you have to transfer your design files over to to carry on with the project. Including LumenRT for free with ORD is by far the most helpful feature because of the visualisation capabilities which most software does not include. ORD is well-suited for what the name of the product says - designing roads. I wouldn't say there are any scenarios in road design that it is less appropriate for.

Incentivized

As a mechanical engineer, it is one of the best tools to just start modeling and engineering with. The UI tools are intuitive and engineering analysis such Mold Analysis, FEA, are great! Other 3D CAD modeling tools have a longer learning curve to master. All in all, if you're not planning to design an entire airplane with large assembly files, then Solidworks is your tool!

Incentivized

• Plethora of design alternatives to choose from right from design to completed models
• Detailed approach towards parametric, mesh and surface modelling
• Well integrated modelling workflows
• Intelligent parametric components with 2D and 3D designs

Incentivized

• Creating linear models, since the app is based on alignment models and templates to extrude along the alignment.
• Precise long section/profile along horizontal alignment. The app practically flatten the horizontal alignment for profile generation.
• Template control. Though the template creation takes a bit of effort to create due to the point rulings. However when done right allows the model to be specifically modified with use of functions like super-elevation, point control, widening, parametric etc.

Incentivized

• The collaborative work environment is a cool and useful feature where groups of people can work on the same model at the same time, and SOLIDWORKS ensures that you don't overwrite each other's work.
• The ease and amount of customization options are very useful for creating a personalized and intuitive user interface, whether SOLIDWORKS is your native CAD package or not.
• It is very easy to quickly edit a model you have already created. The software allows sketch and feature editing without having to take the time to actually enter the sketch/feature environment.
• The use of configurations and configurations-specific dimensions in the same sketch is very useful for creating different forms of the same part

Incentivized

• Some of the more complex models have had a few issues exporting.
• We've struggled with external consultants using the custom Autocad engineering tools, and it plays nicely with MicroStation.

Incentivized

• Buggy at times and crashes
• Requires a lot of training to use the tools effectively
• Model management requires some work

Incentivized

• Save DWG 2D files in inches or metric easily, defaults to metric and has to be manually converted to inches
• When using the sketch feature, the ability to disable ALL references. If I don't know the exact shape and I want to draw/adapt my design, it harshly interprets the references which have no value to me. The easiest exact is to think about when you have a Microsoft Word document that has a lot of formatting, photos, tabs, etc. If you accidentally hit the "enter" key, you can explode the formatting and everything goes crazy. SW does this to me, I just want to "doodle" my sketches, edit/delete/etc and not be bound by arbitrary references.
• For the sketch feature, ability to use a DraftSight plugin of some sort. I'm super fast in DS, if I could draw using the commands in SW then I would probably never open DS again and convert to SW full time. Currently, I only use SW as a way to convert 3D files so I can build everything in DraftSight.

Incentivized

We would not use ORD if is was not for clients' contract requirement to use ORD.

We have absolutely no reasons to not keep with SolidWorks for the foreseeable future.

Incentivized

MicroStation is very hard to use for our newest employees. It is not intuitive, and you need to know where to find the buttons to perform the commands you would like to perform instead of typing in the commands like other similar modeling programs. Also, it has no good traffic turning add-ins. We continue to run ALL our turning in Autoturn, since this is not a usable feature with MicroStation.

Incentivized

I have been using SOLIDWORKS for around 12 years as of writing this review, so have learned where most things are and how they work. When first starting out it was quite daunting, but the interface is well laid out with like functions near each other which made finding new functions relatively easy.

Incentivized

We haven't had to use it for many years, so not able to comment.

Incentivized

We have an unusual arrangement. We don’t pay for support, but we’re partnered with a VAR for second-tier support.

I work with other users if I have questions but when we’ve had to ask the VAR, they always have answers. It appears that all of the VARs have access to a support platform from DS SOLIDWORKS that helps them answer most questions.

Incentivized

The only general purpose CAD program that you can compare MicroStation with would be AutoCAD. MicroStation, in my opinion, is a superior product in every way but one. That one issue is that there are just more people who have and know how to use AutoCAD than there are ones who know MicroStation. This makes AutoCAD easier to get up and running for most firms.

Incentivized

ORD is a lot faster and a lot more modern than Civil 3D even though they're essentially the same product under different names (in terms of workflows). I find that the DGN file format used by ORD is far better than the DWG file format used by C3D because DGNs can contain much more information and multiple models per file. C3D is very heavy on memorizing keyboard inputs while ORD is a much more modern interface that relies mostly on using the mouse for inputs.

Incentivized

Onshape is a direct competitor. It has great entry level pricing and it is easy to access with no installation required. Being a web based app there is sometime some lag being based in NZ. Management also have concerns over where the data is stored on the cloud. With SW we can control where it is stored

Incentivized

• MicroStation usage is primarily necessitated by our major client who also uses the program.
• Without using MicroStation there would be many times where we would not be able to provide our clients with what they need.
• Therefore, MicroStation has had an incredibly positive impact on the business I work for as its usage has continued to secure contracts.

Incentivized

• Drawing creation from model have speed up drawing delivery by 80%
• Model creation for linear project based on simple design speed up model delivery by 80%
• Capturing model change due to alignment change have help speed up change capture by 80%

Incentivized

• Creation of small 3D pieces to generate cash flow.
• Not being able to create 3D sculptures with this tool, and not being able to fulfill the client's requirements.
• To be able to sell high visual quality simulations for companies that hire the service.

Incentivized