Nutanix in San Jose, California offers their software-defined Enterprise Cloud as a hyper-converged infrastructure solution. The Nutanix Cloud Infrastructure solution combines the Nutanix Acropolis virtualization solution, Nutanix AHV hypervisor (though Acropolis works with other hypervisors), Prism cluster manager, Nutanix Calm and Nutanix Flow server management, and is available on the Nutanix NX series of server hardware appliances, as well as third-party OEM appliances.
N/A
StarWind HCA
Score 9.4 out of 10
N/A
The StarWind HyperConverged Appliance (HCA) is a hyper-converged infrastructure solution designed to reduce application downtime on a reasonable budget.
In terms of features its not quite were Nutanix is as the market leader, but It stacks up well against HPE SimpliVity and Azure Stack HCI. If you want to go down the Edge route and you are an MS shop then there is potential to still do this with StarWind HyperConverged …
Verified User
Manager
Chose StarWind HyperConverged Appliance (HCA)
StarWind provided the best value for money against the other solutions we looked at, while providing all the functionality we needed.
StarWind is a major player in this space and competes at every level. The one place that shoots them to the top of my list is their AMAZING technical support.
We looked at some tradtional solutions from HP and Dell along with Nutanix. StarWind had the best solution and price overall.
Verified User
Manager
Chose StarWind HyperConverged Appliance (HCA)
StarWind HyperConverged Appliance was the only option that offered the performance, reliability, and high availability that we were looking for. It's also the solution that is tailored for small organizations and removes a lot of the complexities and extra components needed to …
We evaluated both of these systems and obtained quotes for comparison. Unfortunately both were way out of budget. StarWind however was well within budget! I have also used Nutanix, and the complexity of the management and the setup of the nodes is way more difficult to set up …
While Nutanix may have more bells and whistles with their software, it was just at a price point we could not afford. Starwind filled that gap and then some.
We chose Starwind over Nutanix and Scale because of price and hypervisor. Both Nutanix and Scale use a customer hypervisor and we wanted to use a hypervisor we were already well versed in. Starwind won over Simplivity because of cost and support. During our talks with HP we …
In the end, we chose StarWind because it offered us all the benefits of an HCA with a price that was about 10 times lower than the competitors' solutions.
For an organization that requires top-notch performance HCI, Nutanix is the best. You may start with 3 nodes and expand the cluster as required. The management through Nutanix Prism Central and Element was so easy that even a Junior Engineer was able to handle it. The Nutanix platform is not suitable for organizations with a small budget and fewer requirements for high-performance infrastructure, as the Nutanix solution itself is suited for enterprises.
As a nonprofit, we needed a virtualization platform that was reliable, cost effective, and simple to administer. StarWind HyperConverged Appliance checked all the boxes for us. We went with their refurbished models to lower the cost, and they've been rock solid. We were able to simplify our environment and the platform has been so reliable that I really don't have to think about it. This has been great for me as the sole sysadmin. There are a lot of pieces to manage, and StarWind HyperConverged Appliance have allowed me to focus less on the platform and more on the VM's themselves and the other pieces of our network environment. I think as long as you get the "right size" of StarWind HyperConverged Appliance that this platform could work well for many organizations.
One-click upgrades; whether it's hypervisor, firmware, disk or other updates. This feature has drastically decreased complexity and administration time.
Data Locality. Not all hyperconverged technology is created equal. When I first purchased Nutanix they were the only vendor (and as far as I know, still are) that made sure the storage a VM used was on the same host that VM was running on. Given a normal operating state, the [storage] network is literally only used for replication data.
They got rid of traditional RAID. Nutanix uses software to determine where a VM's storage should be written and replicated to. This dramatically decreases I/O when changing the number of nodes in a cluster, be it on purpose or during a failure scenario. Ex. adding a new node: If one uses RAID arrays then enough space has to be set aside to create a new array that includes the new node, then all the information has to be copied over, and the old array destroyed. RAID arrays do not grow and shrink gracefully so Nutanix has designed a better solution.
The Nutanix management interface was built on HTML5. No more flash headaches!
It is extremely easy to set up, it comes with most options pre-configured for you. But the support group will walk through your entire setup and migration.
It is monitored by StarWind 24x7. Instead of issues being reactive with the monitoring I'm hoping things will be more proactive.
The performance has been outstanding. I think disk was our main limiting factor with our hold hardware.
The one downside I have working with Nutanix is the sales team. They seem to try to add in extra goodies to sales quotes or push for extras that you don't really need and you have to tell them to take them out. Don't be afraid to push back on them.
Need to analyze sizing with sales team to ensure right sizing.
Support team has slight accent but is not too difficult to understand.
Emphasis on security can be improved. Things like default passwords were not changed initially until requested.
Can't really think of much else...If I had to split hairs...on reboots sometimes it took a while to sync with the other node. Max was 30 minutes, but 99% of the time it's 3-4 minutes.
AOS definitely make our dev/test virtual environment management much easier than before. And the consolidation the test/dev environment from Azure and Cisco UCS, we have less need to transfer large amount of data between different hardware platforms which was very big challenge. To expand the capacity is very easy to archive as well.
The hardware appliance convinced me. It is also good to use as a product in the box.Experience of the speed and security of the storage and the data on the storage is important.Installation is relatively easy and support is supportive. You are not left alone.Therefore a clear recommendation
It's not out of the box easy, but once you get the fundamentals the steep learning curve flattens out and the processes to get things done and how it works becomes very apparent. It's wrapping the slight change in workflow from prior VM management methods took time to unbox and apply the Nutanix Cloud Infrastructure way
Overall, the appliance is versatile. It covers the adaptation to all current hypervisors and can be addressed via different protocols. This prepares you for a wide range of uses.Rack mounting is also well thought out. And last but not least, apart from the technical performance, it is also an eye-catcher.
Working with the support team has been great. Connecting with somebody during and after business hours has been smooth, and they have always been responsive and professional. I don't have to wait very long to hear back from them when either sending out an email with a question or inquiry or when calling after business hours when we had to shutdown and bring back up the servers due to hurricanes here in Florida.
The performance is nothing short of amazing. This is an HCI solution, and as any all-flash HCI solution is amazingly fast, Nutanix AOS fills local IO requests until its local IO is saturated before reaching out over the network. This lowers latency substantially compared to vSAN.
Our implementation team were great and worked with us and got the program up and running very easily. Every time we called post implementation we immediately talked to an Engineer, which is so unusual in dealing with companies. Everything they have promised they have full filled. I think their support is top notch.
Literally, while writing this review, I just received an email from starwind saying my VSAN version was out of date due to a recent update coming out and they offered to help me install it. Its just amazing how "on top of it" support is. They'll monitor downtime, reboots, version issues, even the bios firmware on the Dell servers... I can't imagine using any other vendor, they just do it all, and they do it well.
IPv6 is needed for link local discovery. We do not have IPv6 configured on our network so the easiest way to get our nodes configured and discovered by foundation was to configure the IPv4 addressing within the node prior to trying to discover with foundation.
The old saying: Preparation is everything.It should be ensured in advance that the operating system is up-to-date and therefore suitable for the appliance.The recommended network adapters should also be used in the network and the firewall rules adjusted.If this is planned in advance and everything is prepared, then the installation can be carried out relatively quickly.The manuals and the StarWind website are also a very good help.
Nutanix integrates very well with Rubrik for backup and protection of the environment. Nutanix gave us simplicity and scalability compared to VMware and allowed us to extend our infrastructure into the cloud using EC2. One unified management pane for all our workloads, unlike VMWare.
Scale was a proprietary SAN software/hardware and outrageously high priced. The StarWind HyperConverged Appliance was just Dell servers with VMWare ESXi Hypervisor installed running two Windows Servers virtual machines where the StarWind SAN software is installed on. The only thing that was proprietary for StarWind was the StarWind SAN software
We find that return on investment is probably a better metric in most cases.
ROI analysis is more than an exercise. Companies must outline what their future looks like, even if it’s vastly different from what they’re used to and comfortable with.
As good as your financial analysis might be, displacing status quo infrastructure has a lot of emotions tied to it.
Our CIS software has some poorly optimized SQL logic. Our old Failover Cluster w/ a VNXe3200 SAN would take up to 7 seconds to pull a customer's records up. It now takes only 1-2 seconds. Our front office has been much more pleasant since their install.
I would only rarely have to interact with our blade switches and VNXe SAN, so I wouldn't necessarily retain the knowledge of how to configure them. Each time I'd need to make a change, I'd have to refer back to my documentation. That's no longer an issue I have to deal with.
The rack footprint for our cluster went from 14U to 4U, and we were able to achieve it with much less network cabling and with lowered power requirements.
