DraftSight vs. Solid Edge

2D design work

3D design work

Large area (500m²+) analysis and assessment

From product design, including production drawings to lay out of large (10m x 1m footprint) layouts DraftSight is a cost effective solution providing all appropriate interfaces for BIM.

The level of detail during rendering (while it can be slow) is good for visualization and for use in installation and training materials

Incentivized

Well Suited for:

• Integrated designs performed by multiple designers simultaneously (designs requiring a Product Lifecycle Management system);
• Designs requiring a high degree of parameterisation;
• Large companies where specific standards and best practices are applied to all models and drawings created.

Not Well Suited for:

• Personal use in designing one-off models and drawings;
• Small business use where very few of the expensive features are actually used.

Incentivized

• You can easily bring in a dwg format drawing into the programme and it will display the information just as well as AutoCAD.
• The programme supports shortcut features or one-click buttons for the most commonly used operations.
• Script files can be used which is a bonus.

Incentivized

• It has very good user interface in classic or ordered environment.
• In 2D or drafting, you can give any Geometric tolerancing and symbols to any dimension. There is a wide range of options available.
• You can convert any files in step file (.stp) and can open it in other designing applications easily.
• After converting 3D drawings in 2D you can make changes in 2D drawing by converting it in the draft. You can also add details like cross-sections and detailed view.
• You can directly make threads without creating holes.

Incentivized

• The text search and replace is very crude and barely works. Needs a major revamping.
• The layout tabs are very clunky and hard to use. Needs to be fixed.
• DraftSight will fix a problem in one version, mess it up in another version, then fix it again later on. And so forth, and so forth, and so forth. Very poor software update control.

Incentivized

• Being used to 2-key and 3-key commands from the keyboard, it would be nice if this was more robust in Solid Edge. The capability of programming keystroke commands exists in Solid Edge, but it would be more user friendly in that regard.
• Editing hatches can be a challenge.
• I'm not a fan of the ribbon bar, but that seems to be a feature across software platforms in Windows.

Incentivized

It has given us, a small startup, the ability to compete effectively with far larger competitors by evening the playing field at a low cost.

Incentivized

Easy if you know how to use CAD software. But is not very difficult to learn using DraftSight if this is your first CAD software. As soon as you get in to it the work flow will save you a lot of time and its simple interface is very nice.

Incentivized

As mentioned previously, Siemens Solid Edge is not the most user-friendly of products at all. It requires intense training to make sure that the basics are understood, and after that, there are numerous other training interventions needed to be able to perform expert-level CAD functions. The GUI is not intuitive, as many other packages are, and the features built-in are not well defined. The process to use many of these features is counter-intuitive and requires a mind-shift.

Incentivized

Other than a bug created by a VAR tech support that didn't get resolved until I installed the next version, DraftSight has worked fine.

In general it's very quick to load drawings...now it depends a lot on the file we're opening or working on.

Incentivized

Technical support seems to be overseas with broken English and difficulty to read English. I asked for a trial license to try the fix but it was declined. Ask pratiksha.dahotre and gayatri.keskar for details. In summary, they released a broken version, I helped to fix by providing feedback and error logs. They claimed it is fixed but I can't test it.

I have been involved with support and training of Solid Edge for 24 years. Given that I based my business model on support, and have been successful for all these years, I know excellent support. Siemens support for Solid Edge, "GTAC", is the definition of support for a product in every aspect.

Based on some knowledge of AutoCad, using Draftsight took a short time before I felt comfortable using it.

Incentivized

Take time to get used to where commands are and how the interface can be customized to suit your needs and work style. The keyboard commands are very helpful and can make work more efficient if time is taken to learn them.

Incentivized

While SketchUp is free, DraftSights cost is minimal and its abilities are much greater. It is so much easier to layout and modifies a system design. Since DraftSight is compatible with all versions of CAD, it makes it easy to collaborate with customers on their specific system design. We spend less time and see greater sales on our projects.

FreeCAD is often better than Solid Edge 2021 when converting files, but I hope this changes with 2023 NX is overall more powerful, but that is to be expected (and you cant add it above because it is too short for whatever reason).

Incentivized

It's a typical contract for cad software. It was inexpensive at the time I started. But now the more useful features are on the more premium (priced) version.

As a startup, we really appreciate scalable software or tools, and because we use it for diverse types of projects, flexibility is key.

Incentivized

Quite responsive when I have an issue, and with little to no delay in responding. They are professional and know the software so have been able to solve all of the issues that I have had with both using the software and also with making revisions as required. Non-technical issues like invoices have also been resolved quickly.

Incentivized

• Draftsight has been very cost effective, it was free a few years ago then £79 a year, which it still is if you have the standard version. Now the minium level is Profession edition at £159+ VAT per year. Which is still very good value for money, just more that what we currently pay with the standard licences we have.

Incentivized

• It took about 20 hours of use to get the basics of Synchronous Technology, and with just a basic competency I was able to make useful changes to the design. One of those changes was impossible to do our other CAD program.
• My use lately has mostly been on personal time and self-driven, so learning other aspects and features of Solid Edge has been slower. Creating a drawing for a part required a few hours to learn and do the first time, but luckily there were YouTube videos for examples. With practice, I would expect the time to reflect what it takes in SolidWorks (about 30 minutes).

Incentivized