Cisco 900 Series Integrated Services Routers (ISR)
Score 9.7 out of 10
N/A
The Cisco 900 Series Industrial ISR (IR 900) series of routers are designed with an open platform to build a highly secure, reliable, and scalable field network infrastructure.
N/A
Cisco Meraki MX
Score 9.1 out of 10
N/A
Cisco Meraki MX Firewalls is a combined UTM and Software-Defined WAN solution. Meraki is managed via the cloud, and provides core firewall services, including site-to-site VPN, plus network monitoring.
$595
per appliance
Pricing
Cisco 900 Series Integrated Services Routers (ISR)
Cisco Meraki MX
Editions & Modules
No answers on this topic
MX64
$595
per appliance
MX67
$695
per appliance
MX68
$995
per appliance
MX84
$1,995
per appliance
MX100
$4,995
per appliance
MX250
$9,995
per appliance
MX450
$19,995
per appliance
Offerings
Pricing Offerings
Cisco 900 Series Integrated Services Routers (ISR)
Cisco 900 Series Integrated Services Routers (ISR)
Cisco Meraki MX
Considered Both Products
Cisco 900 Series Integrated Services Routers (ISR)
Verified User
Engineer
Chose Cisco 900 Series Integrated Services Routers (ISR)
Cisco Catalyst Switches are technically faster and easier to deploy but don't provide the same flexibility when it comes to 10Gbps services or advanced routing. There are corner cases where having IOS-XE on the 900 series ISRs provides the functionality required for complex …
Cisco 900 Series Integrated Services Routers (ISR)
Cisco Meraki MX
Likelihood to Recommend
Cisco
No problems with any of the Cisco 900 Series [Integrated Services Routers] (ISR) platform features within the enterprise environment. Because these devices are running a version of IOS-XE as opposed to traditional IOS, some of the more 'basic' configurations can become more complex. In the end, the 900 Series is still able to provide the required functionality, but there is a learning curve.
the Cisco Meraki MX 's work great for us we have over 40 locations and each has it's own Cisco Meraki MX that connects to our main Cisco Meraki MX in our datacenter. Each site then connects to Meraki switches and access points. Very easy to setup and keep running smoothly. Secure and easy for users to get connected to VPN.
It's very easy to deploy these devices because it's a cloud-based controlling controller that controls it. So able to, once the device has internet access, all you need to do basically is to look up the controller serial number and it'll basically find it. And once you add it to your network to automatically incorporate that device into your network and basically build the panels for the SD-WAN service.
The simplicity and ease of use for the Meraki Dashboard make it an easy choice for our organization to renew our Meraki Enterprise Agreement. We will likely continue using the Meraki MC67-C, MX450, and other MX models in their catalog until we shift away from Meraki completely
Some features simply aren't there, but the ones that are there are pretty easy to use. Sometimes it is easy to get lost when trying to find the specific device you want to work on, but that's mostly due to how rarely we have to go into the interface.
Meraki MX devices support high availability (HA) configurations, which ensures minimal downtime if one device goes offline. This feature has helped us maintain a stable and reliable network, even in cases of hardware failures. ince Meraki is cloud-managed, we've noticed that the cloud infrastructure is generally highly reliable, with minimal service interruptions or downtime. This makes it easier to manage the network remotely without significant availability concerns. Meraki automatically pushes firmware updates and patches, which helps maintain system stability without requiring manual intervention. These updates are rolled out in a manner that ensures minimal disruption to service.
The interface is pretty responsive. The lower end devices are easy to overwhelm if you have a lot of throughput. Be sure the model you get is rated for the amount of traffic you will have. Overbuild if possible, otherwise you won't be fully leveraging the connection from your ISP.
I haven't ever had a bad experience with Meraki support. On the few occasions where I wasn't understanding the UI or needed some clarification about what a setting actually would do, I contacted them and they were very quickly able to provide help. Returns are simple and fast, too. We had to return a defective device one time and they shipped the replacement before we had even un-racked the one that was faulty. Unlike many other vendors, they didn't ask use to a do long list of scripted diagnostics, they just took my word for it that the device was broken and sent out a replacement immediately
great when they offered it, really tested your knowledge with hands on and see what your peers from other orgs know. glad to see that we were ahead of the curve of what our peers knew
Implementing Meraki MX devices in phases—starting with a pilot group or select branch offices—was invaluable. This allowed us to identify potential configuration issues, troubleshoot problems, and refine our setup before rolling it out company-wide. It also helped to get feedback from early users and adjust the deployment strategy accordingly. The SD-WAN capabilities in Meraki MX were essential for optimizing our WAN traffic and ensuring better application performance across various locations.
I have similar feelings about the NCS 5500 Series Router. IOS-XR is great, but the need to upgrade components to support newer features seems like a planning oversight. 400G Linecards are great and needed.... but they need all new power supplies? Really? Also, the ability to use lags across multiple linecards would be nice. I'm pretty sure that's not available, but that is more understandable.
The Meraki Dashboard has been a lot more intuitive than CradlePoint NetCloud. We switched from CradlePoint to Cisco Meraki MX because we were already familiar with the interface which allowed us to be familiar with a single dashboard.
I think at an organization level it's definitely a 10. You can automate when you're going to upgrade. You can do it on a peer network basis. There might be issues around scalability if things get a bit too complicated, but if you keep it simple and stupid is my examples of a retail store with an fpos machine, you're going to be fine.
I'm going to say positive impact. The biggest thing is especially coming from having a third party taking care of our network to us doing it ourselves. The ease of this with the overall high level visual that we can get as to how our day is starting and running reports to see how many outages have we had, what areas have they actually been in running these reports and being able to gather if it's a certain service provider that's causing an issue in a general area, maybe we need to switch service providers for ISP. So it's been great in that mannerism for us. Ease of manage, I mean, we have a limited number of staff, we have a lot of different offices across the country. And then this is relatively new for us because we did have a previous provider doing all of this for us.
