Cisco HyperFlex Systems is a hyper-converged infrastructure product, based on technology acquired with SpringPath (acquired September 2017). Cisco's modern HCI solution is Cisco Compute Hyperconverged with Nutanix.
N/A
HPE SimpliVity
Score 7.1 out of 10
N/A
HPE SimpliVity is a hyper-converged infrastructure solution. HPE acquired SimpliVity for its Omnicube line of products in January 2017.
N/A
StarWind Virtual SAN
Score 9.9 out of 10
N/A
StarWind Virtual SAN is software-defined storage for efficient storage and backup.
HPE SimpliVity was a black box. You could never really tell what was happening behind the scenes, so you were reliant on HPE to do any troubleshooting for you. It was also tied tightly to the hypervisor and used a modified version of ESXi so you were always behind on updates, …
HPE and Dell solutions were just too expensive for our budget. HPE's solution lacked performance. Dell's solution is plagued by bad reviews which told stories of broken patching procedures and terrible support experiences. The only company who offered me a trial of their …
Smaller sites that would benefit from a cluster of 2-5 nodes. Not saying that it can't scale above that, but I find HyperFlex a great solution for those sites. A simple 3-node edge cluster can provide a huge amount of resources and redundancy. It's also really easy to scale the environment to meet growth requirements.
I only know what I know...which is my IT world. Having two datacenters that were physical servers attached to a SAN that "attempted" to replicate and then migrating. For a SMB small IT shop that happens to have two datacenters already in place...this has been ideal. I can have a generalist maintain the system and we have a private cloud for DR with hardly any effort...the biggest gain by far!
For companies that have 4-5 or more servers, StarWind is a great solution to provide high availability for a low price. It can scale up very nicely for larger implementations to more like 15-20 servers with ease. Although we haven't used it for even larger environments, it's doable. What its not appropriate are really small locations that have 1-2 servers. Unfortunately no one seems to have a good HCC solution in this space.
UCS manager in HX is truly helping us in doing one touch firmware upgrades. Scaling of HX cluster (in few minutes) is too seamlessly due to service profiles.
HX does not hold you back by creating a single data store unlike other HCI products. With HX, you can create multiple data stores and allocate those to desired services. This help logically separate the install base on HX and removes confusion for the admins too.
We run high IOPs workload on HX, and we never felt latency issues due to the Cisco backbone (as you get FI as a TOR switch and options to choose 10G or 40G speeds).
With HX you truly enjoy a single window support from Cisco including for the top of the rack switch (FI in HX case). In other HCI infra, you certainly have to bank on to network switch vendor for support and bring HCI and switch vendor at one pane for troubleshooting latency related issues.
While we increased our footprint on HX, we didn't added additional administrators to support the landscape. This was possible because of the simplicity in managing HX clusters.
With HX we had setup stretched cluster between two near site data centres. This is a unique proposition in HX (we have 2 nodes in each data centre) and data centre failover works absolutely seamless.
Deduplication and Compression - SimpliVity keeps the space consumption to a minimum. We currently have 60 servers running virtually and we still have room to grow. This really helps with the backups as we can have longer retention.
Backups - Ability to keep backups for longer and to create multiple backup policies for a VM is a breeze. You can have a backup policy for each datastore as well as a separate backup policy for the same VM.
Creating Datastores is very easy. No more messing around with LUNS and iSCSI. Just go to the SimpliVity tab and select create datastore and it's done. You can also increase the datastore on the fly as well as have a datastore bigger than 2TB.
File level recovery is included as well. The whole backup process in SimpliVity can help you do away with other software.
the StarWind Virtual SAN allows us to use Starwind Management Console to confirm health of the sync
The High Available nature of the deployment means we can fail over VMs without end users noticing any downtime
Their support is proactive alerting when firmware updates are needed (including iDRAC firmware) or when there are any warnings in the event logs, and schedule a time to remediate the issue with you.
there is the problem with starting cluster where there are not outside DNS and NTP services so we need to workaround this with additional storage or hosting it on the local storage.. many clusters has internal DNS/NTP services not available from outside and they need to be hosted on the HX
there is not RBAC or user mgmt on the CVMs so it is difficult to not add full permission for the people responsible for just shutdown and power on the cluster
native snapshots support with ibm backup products
running from not the only last snapshot in all use cases
Complexity: StarWind Virtual SAN can be complex to set up and manage, especially for organizations with limited IT resources
Limited protocol support: StarWind Virtual SAN supports a limited number of protocols, primarily iSCSI and SMB3
Limited scalability for storage-only deployments: In storage-only deployments, StarWind Virtual SAN has a limit of 32 nodes per cluster
Lack of reporting and analytics: StarWind Virtual SAN has limited reporting and analytics capabilities, which can make it difficult to monitor and troubleshoot performance issues
Limited backup and recovery options: While StarWind Virtual SAN provides some basic backup and recovery options, it lacks advanced features such as snapshot management, backup scheduling, and offsite replication
StarWind Virtual SAN is a great solution and is now an integral part of our network of servers. The product is superb and the support has been amazing. It's perfect for our organisation and we won't be looking to come away from it any time soon!
It sits nicely ontop of VMWare and is easy enough to use. Some improvements to the UI could be done, such as placing buttons where it is expected to have them not in unusual places, so you have to hunt for them. The backup and restore is intuitive and makes things super easy if you need to do a quick rollback. Space savings on multiple VMs and backups means we are backing up more than we need which gives us confidence in what we do. Updating the system is also fairly easy and their support has always been fantastic. They will contact us if they detect any issues, usually before we notice them!
Overall I like the usability of StarWind Virtual SAN because it is a "Set-up and forget" software. Once you correctly have set up the parameters, StarWind Virtual SAN pretty much rolls by itself. The biggest fact that one needs to keep in mind, though, is that the licensing for StarWind Management Console needs to be purchased separately, and while managing StarWind Virtual SAN through the paid Management Console is really easy and is well documented, going the free or - in other words - PowerShell Template route can be taxing if you are not that deep into the topic. You need to be especially careful with it if you switch from paid to free because using the templates incorrectly can cause issues, we had a similar occurence, where we needed to re-provision the SSD cache and the StarWind Support (Yaroslav) helped through remote support and a switch to the Free version afterwards.
The solution has been tested under constant usage for 5 years now and there (knock on wood) has yet be an outage. There were instances if human error during the operation and the StarWind reliably intervened, either through a synchronization or reporting of a degredation of interfaces, e.g. the heartbeat interface.
The software delivered exceptional performance until now with very fast write and speed rates, around 900MB/s through a 10GBit connection on a virtualized fileserver. It meets our demands without any problems whatsoever and we are a very media heavy environment with TBs of raw data.
More documentation is available now than when the product initially came out (which was an issue early on). Because it only supports UCS hardware, I think it does help with support issues. Nutanix has to support much more hardware. At the same time, you're dealing with the Cisco TAC, which can be mixed at times.
Support is very good. With proactive support, you are supported by an engineer in North America who answers the phone and immediately begins assisting with your issue. The folks I have dealt with in the last several years have been very skilled and it is rare to have a ticket open for more than a day or two. Issues affecting production are dealt with appropriately and are escalated within the support organization.
Their support team is dedicated to providing top-notch customer service and is always available to help with any questions or issues that may arise. Their expertise and responsiveness have proven invaluable in ensuring the smooth operation of our virtualized environment. With such excellent support, we feel confident in our ability to utilize this product to its fullest potential, and we highly recommend it to others.
Overall the setup was easy, we did require some help from the technical support team but other than that, we followed all of StarWinds prerequisites and everything else just fell nicely into place with hardly any downtime. The downtime was only due to moving VMs from our previous cluster over to the new StarWind storage cluster.
HyperFlex is built on top of Cisco UCS infrastructure, which allows us to manage other non-HX servers attached to the same UCS environment. This allows us to tie everything together via Intersight and see all of the servers in our data centers. Other platforms don't really have a comparable offering.
We have found the solution surprisingly simple to use. The management console allows us to monitor the solution and we have configured email alerts to alert us about critical issues. These alerts have been proven to work in an actual failure scenario, for example, when we had a memory issue with one of our servers that caused the entire server to crash. The management console also allows us to monitor the solution performance and provides us with access to system logs.
The software is very scalable storage wise. The storage is provisioned through config files, which are created either through PowerShell scripts or the Management Console on the paid version. After that the storage is provisioned through iSCSI. In our case, in case of expansion, we would have to run the PowerShell scripts and do another full synchronization to update any remaining backup nodes, but the procedure is clear and even easier via Management Console, just expand the RAID array, punch the new capacity into the console and start the synchronization!
The simplified management makes it easier to operate and prevents mistakes.
Guided installation using the installer VM means you don't have to configure every component by hand. Improves deployment speed and lowers the risk of configuration issues.
Performance increase of 40-90% compared to our previous compute/storage cluster.
HPE SimpliVity provided us with the ability to replace our existing infrastructure with a solution that provided better backup and recovery, and an off-site DR solution, at a lower price point than other solutions.
