Creality Ender Pro vs. Kameleoon

Print quality and speed are good. There is not much noise except for the fan of the power supply. Filament change is easy. The files are printed on the SD card that comes out of it. It's nice to be independent of the computer. It doesn't smell much in print. I took a break from printing in the middle of printing. After moving, he was able to continue from where he left off.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

There are many platforms to choose from when it comes to experimentation and personalization. We've found Kameleoon to be an excellent choice for those looking for a balance in capabilities (it checks all the boxes), cost-effectiveness, and a helpful customer success team paired with a responsive product team.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Especially the first installation step was quite easy.
• Fast and high resolution print quality is possible.
• It can be removed quickly thanks to the magnetic table.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Widget editor (creating a widget without any code)
• Results analysis dashboard (easy to read and understand)
• The consulting team (always available to help and guide us - Thank you [C...] !!)
• Segmentation (it allows us to easily target a specific audience)
• The tool is very intuitive and easy to use

• After installation, it is necessary to adjust the table.
• The sound level during printing could have been even lower.
• If you want to print ABS. You should prefer closed case printers.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Interface of the graphics editor is quite conceptual. It is fine after a few days but it takes a little while to recognize some icons.
• Their online tutorial could also be easily improved.
• If you want to do major graphical changes on your website, you will have to inject JS and CSS code which requires some technical background but I don’t know if that point can be improved.

already renewed :)

Kameleoon offers one of the best UI's I've seen when I've compared it to 4 of the other big competitors in the landscape. They have some improvement areas when it comes to the UX - Which is easily solvable if/when prioritized. There's a little to much "clicking" and "new tabs" in my opinion

We have a very good relationship with our CSM and with Kameleoon’s technical team. We trust them fully to help us with the set-up of A/B tests and personalizations, analysis of results, and any technical matter that we may encounter. They always do their best to be as responsive as possible, and our communications are always very fluid.

Creality Ender Pro is more affordable than other printers in its class. It is very easy to install and maintain. The control panel is beautiful and user-friendly. Advice for those who want to buy for hobby purposes; my general opinion can also be used for professional purposes after a certain period of time.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

We were looking for a new tool after Google sunset their tool. We tested AB Tasty and Kameleoon. Our dev team was unhappy with the weight of the AB Tasty tag and I found the level of service with Kameleoon much higher.

• It can make your work easier, especially in the sizing phase of the product we designed before taking the CNC output, which requires high strength. You can pre-stress the dimensions of the product you print out.
• Thanks to the fast and high-quality output of the printer, it will speed up your design phase.
• The product is able to print without the need for any PC and continues from where it left off in cases such as power cuts.

Incentivized

Independently Invited by TrustRadius

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info

• Since we started using Kameleoon, our ROI indicators are all green. Truth is, we rely on exigent customers. If they’re not happy with our service, we will pay for it on the long term. Kameleoon helps us making sure this is not happening by providing us the tools to continuously improve our customers’ experiences.

Incentivized

Invited by the Vendor

A de minimis incentive was given to thank the reviewer for their time. The incentive was not used to bias or drive a particular response, nor was the incentive contingent on a positive endorsement. More Info