IBM Storage FlashSystem, an all-flash storage array, delivers ~2 PB of effective capacity per single rack unit. Engineered with unique FlashCore Modules, it offloads data services including compression, encryption, deduplication, and ransomware threat detection ensuring optimum performance and resiliency.
$14,200
StarWind Virtual SAN
Score 9.8 out of 10
N/A
StarWind Virtual SAN is software-defined storage for efficient storage and backup.
N/A
Pricing
IBM Storage FlashSystem
StarWind Virtual SAN
Editions & Modules
No answers on this topic
No answers on this topic
Offerings
Pricing Offerings
IBM Storage FlashSystem
StarWind Virtual SAN
Free Trial
Yes
Yes
Free/Freemium Version
No
Yes
Premium Consulting/Integration Services
No
Yes
Entry-level Setup Fee
No setup fee
No setup fee
Additional Details
Entry-Level IBM Storage FlashSystem:
For any organization looking for an all-flash array with features that are both enterprise conducive and budget friendly, the small to entry level offering prices from IBM begin at $18,400.
Mid-Range IBM Storage FlashSystem:
For businesses wanting to take advantage of an enterprise-quality flash array for critical workloads (such as SQL databases, SAP, ERP, CRM, etc.), list prices start at $104,600.
High-Performance IBM Storage FlashSystem:
Organizations seeking a storage array with the ability to run multiple instances of critical applications that are both performance intensive and capacity sensitive, can find IBM prices starting at $368,500.
Contact IBM for configuration and pricing details.
Top choice for IBMi integration. In general, it's a very good solution for quite a lot of customers. If you need a 3 site replication solution (HA + DR) maybe it's not the best solution, unless you use SVC. FlashCore Modules have very powerful compression rate, while mantaining good performance: high IOPS rate and really low latency
For remote locations, where communications are limited and cloud services are difficult to obtain, on-premises servers are the only solution. Hardware solutions require spares in storage for redundancy and are more expensive than software solutions. If communications and cloud computing are highly available, then solutions such as StarWnd Virtual SAN would not be needed.
the StarWind Virtual SAN allows us to use Starwind Management Console to confirm health of the sync
The High Available nature of the deployment means we can fail over VMs without end users noticing any downtime
Their support is proactive alerting when firmware updates are needed (including iDRAC firmware) or when there are any warnings in the event logs, and schedule a time to remediate the issue with you.
Definitely we need to be able to extend a volume that is part of a mirror pair or Policy-Based Replication(PBO) on the fly.
Expansion of mirrored volumes/volume groups should resynchronise only the changed data (Almost like making use of change-volumes) and not trigger a full resync.
Please allow us to select downloading drive microcode also from Fix Central directly onto the flashsystem like with updates.
Complexity: StarWind Virtual SAN can be complex to set up and manage, especially for organizations with limited IT resources
Limited protocol support: StarWind Virtual SAN supports a limited number of protocols, primarily iSCSI and SMB3
Limited scalability for storage-only deployments: In storage-only deployments, StarWind Virtual SAN has a limit of 32 nodes per cluster
Lack of reporting and analytics: StarWind Virtual SAN has limited reporting and analytics capabilities, which can make it difficult to monitor and troubleshoot performance issues
Limited backup and recovery options: While StarWind Virtual SAN provides some basic backup and recovery options, it lacks advanced features such as snapshot management, backup scheduling, and offsite replication
As flash technology evolves rapidly, vendors should [adapt] to the changes and onboard them in their products. IBM is a bit slow in adopting advanced technology in [its] portfolio. Even though the current product is good, my decision is purely based on how the transformation of the product [is] being produced and supplied to [the] end-user.
StarWind Virtual SAN is a great solution and is now an integral part of our network of servers. The product is superb and the support has been amazing. It's perfect for our organisation and we won't be looking to come away from it any time soon!
The integration into our SVC and the midrange systems are very well working. We do use cross site replication and global mirror which in turn is easy setup and the consistency groups are well maintained. The storage does global mirroring but also internal cross room replication as well. The integration of cloud object storage also helps in tiering the overall system.
Very easy to use and manage from an IT standpoint. The user interface is well laid out, provides access to the underlying hardware configurations, and allows customization of storage volumes from each cluster node in your environment. Can provide differing levels of access, so team member access can be set up based on roles.
Yes. The last really issues I've seen in the environments of my customers were back in the "Storwize" era of systems. Issues with code updates or sometimes rarely failing critical components. BUT: since every component is at least dual redundant even back in that day real outages were very rare. And today in the "FlashSystem Era" the systems are so reliable and available even during code updates there are no complaints. I think the 5 or 6 9s are completely achieved.
The solution has been tested under constant usage for 5 years now and there (knock on wood) has yet be an outage. There were instances if human error during the operation and the StarWind reliably intervened, either through a synchronization or reporting of a degredation of interfaces, e.g. the heartbeat interface.
Latency and throughput have been excellent. The compression is done natively on the NVME modules so we do not see an impact there. the distributed parity does not seem to impact write speeds at all. We have found database performace has increased quite a bit over our old hybrid storage solution.
Having a single tier of performance makes it easy to set up SLAs for workloads.
The software delivered exceptional performance until now with very fast write and speed rates, around 900MB/s through a 10GBit connection on a virtualized fileserver. It meets our demands without any problems whatsoever and we are a very media heavy environment with TBs of raw data.
I would rate the overall support for IBM Storage FlashSystem with a 10. The response times have consistently been fast, and the support engineers always come prepared with relevant questions and practical solutions. They demonstrate a deep understanding of the product and our use case, which means issues are typically resolved quickly and without unnecessary back-and-forth. This level of support has been especially valuable for our SAP environment, where uptime and quick resolution are critical.
Their support team is dedicated to providing top-notch customer service and is always available to help with any questions or issues that may arise. Their expertise and responsiveness have proven invaluable in ensuring the smooth operation of our virtualized environment. With such excellent support, we feel confident in our ability to utilize this product to its fullest potential, and we highly recommend it to others.
Very good traning by experienced personnel. I attend instructor led sessions on IBM TechExchange and STUs before as well as IBM workshops for FlashSystems at IBM Böblingen which I helped to prepare and improve after piloting them. Absolutely nothing to complain about FlashSystem training in Germany or USA. So: all good here!
THe training is often selfpaced and easy to follow if you have worked previously with other storage products. The content is clear and contains all the information needed for an admin to learn. However the troubleshooting part is not always included and this is dependent on forums or other sources where the information is not accessible very easily.
I was amazed by the way IBM Flash storage provides a huge amount of storage within the limited footprint, it helped us to replace big fat storage arrays, which aided in the process of moving towards lower hardware, carbon, and energy consumption footprint. We can comfortably say that Flash helped us to host applications fast with a blazing speed and user transactions are quite quick.
Overall the setup was easy, we did require some help from the technical support team but other than that, we followed all of StarWinds prerequisites and everything else just fell nicely into place with hardly any downtime. The downtime was only due to moving VMs from our previous cluster over to the new StarWind storage cluster.
For the past six months, we have been utilizing this technology in our projects to manage a massive workload and produce swift business outcomes on a crucial production database. The IBM FlashSystem 7200, which offers high performance and compression, has so far been a great experience for us. The results and functionality of this product have delighted our consumers.
We have found the solution surprisingly simple to use. The management console allows us to monitor the solution and we have configured email alerts to alert us about critical issues. These alerts have been proven to work in an actual failure scenario, for example, when we had a memory issue with one of our servers that caused the entire server to crash. The management console also allows us to monitor the solution performance and provides us with access to system logs.
I'm using cognos - especially cognos reports - as a part of IBMs Storage Intelligence software to manage datacenters and report storage and overall resource consumption to my customers. The software is reliable and - my customers who are using cognos in their businesses - say that they are very satisfied about the scalability of cognos. I can give it only an 8 rating because of the quite heavy resource footprint...
The software is very scalable storage wise. The storage is provisioned through config files, which are created either through PowerShell scripts or the Management Console on the paid version. After that the storage is provisioned through iSCSI. In our case, in case of expansion, we would have to run the PowerShell scripts and do another full synchronization to update any remaining backup nodes, but the procedure is clear and even easier via Management Console, just expand the RAID array, punch the new capacity into the console and start the synchronization!
