Cisco Meraki MX Firewalls is a combined UTM and Software-Defined WAN solution. Meraki is managed via the cloud, and provides core firewall services, including site-to-site VPN, plus network monitoring.
$595
per appliance
Extreme Wireless Access Points
Score 9.1 out of 10
N/A
Extreme Networks' Wireless Access Points (or ExtremeWireless) are designed to provide performance in the most demanding environments with the latest Wi-Fi technologies including 6 GHz, OFDMA, MU-MIMO, and software-defined dual 6 GHz radios.
The Meraki MX lineup is well suited for organizations that need centralized management of multiple locations, as it allows for both quick deployment and simple/easy remote administration all from a single pane of glass. It also works very well for providing VPN access for remote workers and helps monitor end-device uptime. It does, however, fall a bit short in its firewall's customization, compared to traditional appliances (like our WatchGuard Firebox), so perhaps less suited for organizations that need more customization, as the Meraki MX lineup is primarily designed for simplicity and straightforward cloud-based management.
The Extreme access point solution has been used in the cooperative scenario with VLANs for employees in access through 802.1x authentication and also for guests through the captive portal that allows access of people for a limited time and prior registration. The equipment has great performance and connection speed and supports a high density of users connected at the same time without lag and crashes. The management of this equipment is being carried out through software with cloud management and is accessed by our infrastructure team to configure and monitor alerts.
The Cisco Meraki MX series is phenomenal at allowing us to remotely manage networks. So the devices usually act as the brain behind our client's networks, which makes it really, really easy for our team to take a look at what's going on in those client network environments, resolve any issues, and make sure that our client's networks are staying secure.
Ease of use and Management. The process of implementing APs is straight forward and managing the wireless infrastructure is quite simple and efficient.
Coverage: we are very happy with the distance each AP coverages in our warehouses without having any drop issues or over implementing APs.
Cost competitive versus other cloud managed wi-fi solutions such as Cisco, Aruba or Mist.
Layer seven firewall rules. Just making them more granular. We've been in meetings with Cisco SES where I've said feature requests many times and that's one of the big ones where it's just a little cumbersome to implement layer seven rules right now.
Just making them more granular. We've been in meetings with Cisco SES where I've said feature requests many times and that's one of the big ones where it's just a little cumbersome to implement layer seven rules right now.
In my experience, licensing has become a nightmare. Licensing must be tied to a device, they also won't let you activate used units from other companies if they are donated or purchased third-party.
Customer service is outsourced overseas.
In my experience, technicians are incentivized to close tickets quickly - whether the issue has been fixed or not - which can be frustrating to work with.
The simplicity and ease of use for the Meraki Dashboard make it an easy choice for our organization to renew our Meraki Enterprise Agreement. We will likely continue using the Meraki MC67-C, MX450, and other MX models in their catalog until we shift away from Meraki completely
Some features simply aren't there, but the ones that are there are pretty easy to use. Sometimes it is easy to get lost when trying to find the specific device you want to work on, but that's mostly due to how rarely we have to go into the interface.
Extreme Wireless Access Points are easy to manage. They are easy to deploy and install. The hardware and firmware are reliable. There a number of things to be improved since we are still using the WiNG platform, but all of those things will be much better when we migrate to CloudIQ.
Meraki MX devices support high availability (HA) configurations, which ensures minimal downtime if one device goes offline. This feature has helped us maintain a stable and reliable network, even in cases of hardware failures. ince Meraki is cloud-managed, we've noticed that the cloud infrastructure is generally highly reliable, with minimal service interruptions or downtime. This makes it easier to manage the network remotely without significant availability concerns. Meraki automatically pushes firmware updates and patches, which helps maintain system stability without requiring manual intervention. These updates are rolled out in a manner that ensures minimal disruption to service.
The interface is pretty responsive. The lower end devices are easy to overwhelm if you have a lot of throughput. Be sure the model you get is rated for the amount of traffic you will have. Overbuild if possible, otherwise you won't be fully leveraging the connection from your ISP.
Extreme Wireless Access Points can support all our devices, even in high capacity areas. They are easy to manage and get basic information. There was a time back around 2017-2018 where people's devices needed to make sure they were using the latest wireless drivers; otherwise, people were having connection issues. Other than that time period, we were able to have fewer complaints from end users.
I haven't ever had a bad experience with Meraki support. On the few occasions where I wasn't understanding the UI or needed some clarification about what a setting actually would do, I contacted them and they were very quickly able to provide help. Returns are simple and fast, too. We had to return a defective device one time and they shipped the replacement before we had even un-racked the one that was faulty. Unlike many other vendors, they didn't ask use to a do long list of scripted diagnostics, they just took my word for it that the device was broken and sent out a replacement immediately
Support was always responsive and willing to help, but at times did not know when to call it and send a replacement to stop the bleeding. I respect that fact that they wanted to get the solution working, and the wanting to learn more and understand, but at times you cant do that at the expense of the customer.
great when they offered it, really tested your knowledge with hands on and see what your peers from other orgs know. glad to see that we were ahead of the curve of what our peers knew
Implementing Meraki MX devices in phases—starting with a pilot group or select branch offices—was invaluable. This allowed us to identify potential configuration issues, troubleshoot problems, and refine our setup before rolling it out company-wide. It also helped to get feedback from early users and adjust the deployment strategy accordingly. The SD-WAN capabilities in Meraki MX were essential for optimizing our WAN traffic and ensuring better application performance across various locations.
Cisco Meraki MX provides simplicity and scalability while cutting costs. With Meraki MX, you get a Security appliance, router, and Firewall in one appliance and managed with one GUI. These features enable the network engineers to maintain large-scale enterprises with a single dashboard from a remote site or anywhere with internet, all thanks to the Meraki cloud dashboard
I've used both Aruba and Cisco (traditional, not Meraki) for wireless, and each have their own strengths. Aruba offers a lot of feature functionality, though the interface is difficult and confusing to use (this was ~4 years ago). Cisco wireless is fairly straightforward to set up and expand, though features are more limited. Aerohive's benefit is the easy+speed of deployment. I've also used the Citrix NetScaler SSL VPN soft client and that works fairly well, though it doesn't compare like-for-like due to the fact that it's software vs. Aerohive, which is hardware.
When I first started with my company we had various infrastructure and a mix of tech. Since going to Cisco Meraki MX we have noticed better network performance and our new sites are much easier to bring online. Users have noticed an improvement in VPN connection and getting into all our systems.
From a positive impact? Basically it allows us to set up shop very quickly. It allowed us to add sites to our network very quickly. From a negative perspective, I think the only thing is that I can see from a negative perspective is I have a preference to working with ACLI in terms of how I engage with the youth tool At the moment, the only way to actually engage with a tool is on a gui and sometimes what I'd actually like is more detailed information in terms of actual configuration that you'll actually get out of ACLI.
Linking APs to AD, via NPS, and gaining the password reset policy; helped us move past some issues that we were held up on with SOC
Segregating corporate wifi and guest wifi, plus forcing guest wifi to agree to the Acceptable Use Policy, was needed to pass a compliance audit of the network.
Being able to locate which users are connected to which individual wifi AP, has been a asset with troubleshooting
APs sharing connections allows for us to overlap the wifi zones and create redundancy if an AP were to go offline for any reason.
