Intermapper vs. PathSolutions TotalView vs. Statseeker

Intermapper is a light weight, quick and easy to use monitoring application. It will get you up and monitoring key infrastructure devices with a simple management interface and effective alert system that doesn't generate a lot of noise. It provides mobile device access through a web interface and is relatively inexpensive.

Incentivized

TotalView is well suited for an infrastructure where you are looking for a cost-effective, additive network management tool for in-depth device diagnostic information. This will not be a one-stop shop application, but it does what is advertised very well. SNMP is required for configuration and adding additional devices is quick and simple. This product also works well with Shoretel VoIP systems and allows for a full overview of connected phones along with being able to view calls on an extension/IP basis.

Statseeker is an excellent choice to monitor a small, medium or large network. It uses SNMP to monitor switches, routers, appliances and really anything that has SNMP. The reports and output you can get from the system are invaluable. The speed of the system compared to other monitoing systems is great. Overall an excellent system.

Incentivized

• The best thing about Intermapper is that it is map-based. You start by building your map, which is done completely automatically. I've used many different monitoring software packages, Solarwinds, Nagios, Opmanager, and it is a royal PITA to create live maps with those.
• Another great feature is that it shows you, visually, the bandwidth utilization of your network by using "ants" and color codes. Incredibly useful.
• Alarms are very easy to setup, again much easier than the packages mentioned above.

Incentivized

• The setup is fast and easy - 500 devices in 20 minutes.
• The ability to go back a day or a week in time allows us to more easily troubleshoot the "what happened at 3 a.m. yesterday" question.
• It gives us easily accessible stats for checks and balances like device types, counts, models, serial number etc.

• Extremely fast and responsive.
• It can poll huge amounts of data quickly.
• Excellent reporting features.

Incentivized

• Setting up probes in bulk can be difficult, so it can take a long time to get the system set up correctly to start.
• Sometimes the probes can be sensitive and report false positives.
• Interface can be a little clunky and non intuitive at times.

Incentivized

• If you have some complexities in your network addressing, the network diagram tool will lay everything out automatically, but it will be confusing to look at. There is a way to edit the diagram so it looks more intuitive, but it may require some time to edit everything the right way.
• TotalView will count virtual interfaces such as voice dial-peers and service modules as "ports," which counts against your license count. However, there is a way to edit each device to remove these "false positives" so it doesn't suck up licenses, but it can take some time to clean those up.

• The user interface could be improved.
• Support can take some time to respond as they are based in Australia. However, they may be moving to the US.
• More dashboard customization.

Incentivized

The product works well and is very easy to maintain. As such, we haven't had many occasions to use support. When we have called them they were easy to contact and responsive to our questions. We have had the product for years and it may have been a year or better since the last time we contacted them.

Incentivized

Support is very good, however, they have been based out of Australia so you have to deal with the time difference. Once you get them they are excellent. I have heard they are shifting some of the company to the US so that should help with support.

Incentivized

Intermapper is a cross between WhatsUp Gold and Nagios. WhatsUp Gold being for a less technical end-user and Nagios doing more than just SNMP scans and up down monitoring.

Incentivized

The three tools listed do different things with some similarities. For us the biggest need was data analysis, semi-automatic troubleshooting, and data gathering and topology mapping. TotalView hit the most of these in the price point we were looking for. Each tool has "extras," but we felt that the extras provided by TotalView were good enough and that the other tools didn't justify the cost.

Both are similar, but I feel Statseeker is more feature-rich and the user interfaces much much faster than NPM. The UI is not quite as good as NPM, but I believe the slimmed-down UI is what allows for such fast query speeds.

Incentivized

• Downtime costs money. Every minute we can get ahead of an outage is time that a plant is not sitting there waiting. We don't need to wait for a call from a plant, we know they are down immediately and we can begin troubleshooting.

Incentivized

• Wuite possibly the best spent money i have recommended in my 20+ year IT career.

• Great visualization of problem areas.
• It helps speed up problem resolution.
• Great capacity planning.

Incentivized