Atlassian Confluence vs. Autodesk AEC Collection vs. Designcenter Solid Edge

It is well suited due to the below reasons 1. Easy collaboration between teams 2. Strong integration with other applications 3. Centralized documentation among teams and within the organisation 4. Project planning and report sharing 5. Employee onboarding is easier and maintain HR policies very well. Less appropriate in below scenarios When this is being used as a main tool for communication rather than its purpose of collaboration.

Incentivized

If you are a commercial contractor or subcontractor, Autodesk AEC Collection, along with other Autodesk software is a must. There is no other way to design estimate and plan large construction. For residential construction, It may not be as necessary but it could still be useful if your primary construction projects are new builds rather than renovations.

Incentivized

Well Suited for:

• Integrated designs performed by multiple designers simultaneously (designs requiring a Product Lifecycle Management system);
• Designs requiring a high degree of parameterisation;
• Large companies where specific standards and best practices are applied to all models and drawings created.

Not Well Suited for:

• Personal use in designing one-off models and drawings;
• Small business use where very few of the expensive features are actually used.

Incentivized

• Cross product linking - If you use other Atlassian products then Atlassian Confluence is a no-brainer for your source of documentation, knowledge management etc. You can show previews of the linked asset natively E.g. showing a preview of a JIRA ticket in a Atlassian Confluence page.
• Simple editing - Though the features available may not be super complex right now, this does come with the benefit of making it easy to edit and create documents. Some documentation editors can be overwhelming, Atlassian Confluence is simple and intuitive.
• Native marketplace - If you want to install add-ons to your Atlassian Confluence space it's really easy. Admins can explore the Atlassian marketplace natively and install them to your instance in a few clicks. You can customise your Atlassian Confluence instance in many different ways using add-ons.

Incentivized

• Collaboration with multiple users and
• Software for Computer Assisted Design
• Saving and Documentation of Plans and Blueprints

Incentivized

• It has very good user interface in classic or ordered environment.
• In 2D or drafting, you can give any Geometric tolerancing and symbols to any dimension. There is a wide range of options available.
• You can convert any files in step file (.stp) and can open it in other designing applications easily.
• After converting 3D drawings in 2D you can make changes in 2D drawing by converting it in the draft. You can also add details like cross-sections and detailed view.
• You can directly make threads without creating holes.

Incentivized

• UI Design is very simplistic and basic could make use of more visually interesting colour choices, layout choices, etc.
• Under the 'Content' menu, it defaults to having a landing page for all L1 and L2 category pages. Meaning as long as the broader content category has a sub-category, it still creates a separate landing page. In my team's case, this often creates blank pages, as we only fill out the page at the lowest sub-category (L3).
• Hyperlinks are traditionally shown as blue, however, this results into very monotonously blue pages in cases where a lot of information is being linked.

Incentivized

• Revit is limited in its use for civil engineering and landscape architecture.
• There are bugs due to the complex nature of the software.
• Use of software requires the latest high-tech computers.

Incentivized

• Being used to 2-key and 3-key commands from the keyboard, it would be nice if this was more robust in Solid Edge. The capability of programming keystroke commands exists in Solid Edge, but it would be more user friendly in that regard.
• Editing hatches can be a challenge.
• I'm not a fan of the ribbon bar, but that seems to be a feature across software platforms in Windows.

Incentivized

I am confident that Atlassian can come with additional and innovative macros and functions to add value to Confluence. In 6 months, Atlassian transformed a good collaborative tools into a more comprehensive system that can help manage projects and processes, as well as "talk" with other Atlassian products like Jira. We are in fact learning more about Jira to evaluate a possible fit to complement our tool box.

I gave a rating of 10 because, thus far, Autodesk AEC Collection Seems to be on the leading edge for what is required for the construction planning, implementation, and continued of real-world assets. Autodesk has been a great benefit for our organization and has allowed us to continue to improve not only ourselves but the people we work with. We have been using Autodesk AEC Collection for a number of years and hope to continue for a long time coming.

Incentivized

Atlassian Confluence is a great tool for project management, especially for internal documentation. It has a minimum governance requirement to use its full power. Also, it is a little pricy to unlock its full power as well, so it is not recommended for companies with a low budget in my opinion.

Incentivized

The software has a significant learning curve. You also must know and understand construction standards and codes. Each member of our BIM team has spent 10+ years in construction and has had years of software training. The software also requires powerful computers to render the models. Without a BIM focused gpu and processor, the software will seem less usable when in reality, the computer is not capable of running the software properly

Incentivized

As mentioned previously, Siemens Solid Edge is not the most user-friendly of products at all. It requires intense training to make sure that the basics are understood, and after that, there are numerous other training interventions needed to be able to perform expert-level CAD functions. The GUI is not intuitive, as many other packages are, and the features built-in are not well defined. The process to use many of these features is counter-intuitive and requires a mind-shift.

Incentivized

I do not recall having outages or applications error so far, very reliable and available.

Incentivized

We never worked against the tide while using Confluence. Everything loads considerably fast, even media components like videos (hosted on the platform or embed external videos from Youtube, for example). We are not using heavy media components a lot, but in the rare occasion we happen to use one we have no problems whatsoever.

Incentivized

This rating is specifically for Atlassian's self-help documentation on their website. Often times, it is not robust enough to cover a complex usage of one of their features. Frequently, you can find an answer on the web, but not from Atlassian. Instead, it is usually at a power user group elsewhere on the net.

Incentivized

I have been involved with support and training of Solid Edge for 24 years. Given that I based my business model on support, and have been successful for all these years, I know excellent support. Siemens support for Solid Edge, "GTAC", is the definition of support for a product in every aspect.

Overall, I am very satisfied with the initial implementation (and the subsequent upgrades and implementations made over the years).

This product has never rose to the level of being an major issue at an executive level. It has quietly and valiantly done it's job for our company!

Incentivized

We chose Atlassian Confluence over SharePoint because it's much more user-friendly and intuitive. Atlassian Confluence makes collaboration and knowledge sharing easier with its simpler interface and better search. While SharePoint can be powerful, it often feels clunky and complex, making it harder for our team to actually use it.

Incentivized

Other products that have been used include Civil Designer and Model Maker for civil services. Other products for structural designs include aq product called "SEDA" These products are not included in the listings.

Incentivized

FreeCAD is often better than Solid Edge 2021 when converting files, but I hope this changes with 2023 NX is overall more powerful, but that is to be expected (and you cant add it above because it is too short for whatever reason).

Incentivized

This tool is very adaptable. So much so we use it for three completely separate projects, in three very different ways.

Incentivized

• We totally rely on this tool since a decade now and despite being so much transition in our company it has served us well in those transitions
• Many times, during security audits we are asked to showcase our readiness for various compliance points and confluence helps us a lot in maintaining that
• Talking about Confluence in front of clients and customers gives us an upper hand that we are up to date with latest trend and technologies and tools for our RnD planning and management

Incentivized

• Positive impact on collaboration between disciplines.
• Products are the industry standard, which allows for collaboration with other firms.

Incentivized

• It took about 20 hours of use to get the basics of Synchronous Technology, and with just a basic competency I was able to make useful changes to the design. One of those changes was impossible to do our other CAD program.
• My use lately has mostly been on personal time and self-driven, so learning other aspects and features of Solid Edge has been slower. Creating a drawing for a part required a few hours to learn and do the first time, but luckily there were YouTube videos for examples. With practice, I would expect the time to reflect what it takes in SolidWorks (about 30 minutes).

Incentivized