Likelihood to Recommend Cisco Aironet 1550 Series Access Points is very useful for outdoor locations that are more exposed to the wilderness or the weather, which provides uninterrupted wifi access during high winds and bad weather. It also is useful for hazardous locations that are prone to danger or wildlife. Unfortunately, it would not be appropriate to get a Cisco Aironet 1550 Series Access Point if it is only needed for basic wifi use, or indoor use, as the extra features and price would not be necessary.
Read full review Cisco [Aironet Access Points] are well suited in offices where they can be managed by a wireless LAN controller (WLC). Using them in this way allows the APs to be well managed and security policies can easily be enforced down to users connecting to these APs for wireless access. Scenarios, where Cisco [Aironet Access Points] are less appropriate, are in small-office-home-office (SOHO) situations because of price and licensing costs to use a WLC to manage them. Thus, using them, in this case, would be that the APs would have to be in Autonomous mode, and the technical know-how in converting a lightweight AP to an Autonomous one is not straightforward.
Read full review Pros Outdoor mesh bridging of access points brings significant cost savings to many of our production facilities. Deploying mesh APs is a significant cost reduction over trenching conduit to connect remote areas via fiber. Cisco APs are extremely resilient, with a failure rate of below 5% in some of our harshest environments. Cisco APs have the intelligence to identify wireless interference sources with Clean Air technology Read full review Until 2018, our Aironets were 1560 series, and each was managed separately. We had about 9 devices, 3-4 per floor, strategically placed on each floor to get a good coverage map over a three-floor environment. Their coverage was greater than expected. With the latest 1852 models we have, they are managed by a controller, and frankly, the coverage is a smaller area, requiring more units. We have worked with support for months and this is the final outcome of all the setting changes - we simply need more devices to cover the same area. None of the models I have used have needed reboots. We usually only reboot the devices annually, and they don't have issues requiring restarts. With the 1560 series, the connection strength was extremely consistent. With the new 1852 model, which is managed by one of the WAPs as a controller, it is supposed to use smart technology to load balance (optional) and determine which of the WAPs is appropriate to connect the requesting device to - great idea - but it does NOT work well. Read full review Cons In the facilities where we operate, we had to put a reinforcement on the ceiling to avoid problems due to the weight of the access point. On the appearance, it could be smaller and lighter. As for the hardware, I think it's incredible, I don't see any points to improve. Read full review On the Mobility Express models, it’s hard to configure all from the GUI, and sometimes the GUI is buggy In Mobility Express, the (virtual) controller is not able to push the right image to the APs. This sometimes results in not joining the APs Some minor issues with firmware Read full review Likelihood to Renew There is no other better option than this. It's the line between the commercial Cisco grade AP's and industrial ones.
Read full review If Cisco keeps innovating the feature sets on the next 1800 models, I would definitely try it out to improve the experience of my users and to keep them on the latest technologies
Read full review Usability Everything clear and easy to use
Read full review Pretty straightforward guide, which was built since OEAP600 AP's and never improved, this is a good thing for user to tackle when they configure the personal SSID, but does not reflect how it should be in 2020, where everything is mobile compatible and app ready. Cisco are going to have an app for this, but it comes with greater cost.
Read full review Performance The Cisco Aironet 1560 Series Access Points served their function well. They were reliable, provided decent speeds, resisted the elements, and provided a good investment. The only downsides were mostly appearance which doesn't matter that much. However, I believe that the tech in the access point is not future proof which is why I did not give it a nine or ten star rating.
Read full review Performance is great until you hit load towards the higher end of its rated load. So if you have a super highly congested wifi area, you will want to either deploy a higher end unit or split the traffic to a few of these guys to not see bandwidth issues that you may see otherwise.
Read full review Support Rating Initially I had a problem with the regulatory and channel selection, it was a bug on the AP as it was fairly new, solved by TAC on engineering release, and since then it has been performing flawlessly.
Read full review If you are able to identify the problem initially, you would be able to explain it to the TAC. In order for the TAC to understand it, the TAC engineer must be competent enough to understand it, and have the devices already in lab to test with. Each bug I encountered the TAC was able to help. And I was able to file at least 3 bugs on the 1815T and M.
Read full review Alternatives Considered Making the decision to use Aironet is more related to the type of scenario that you have. We chose Aironet because we mainly manage all the network internally and already have Cisco products to integrate with Meraki which is a good option if you are starting from scratch.
Daniel At Director De TecnologÃas de Información
Read full review Cisco Aironet has it place in the modern workplace and is great for single location deployments creating a good robust affordable solution. Installing them in a plant that has exposure to environmental elements they have stood the test of time, well so far. If you are looking for multi-location, multi-national or international deployments with a single plane of glass the
Cisco Meraki MR 's are a better choice, enhancing the time to deploy and ease of management.
Read full review Scalability The software of the Cisco Aironet 1560 is highly scalable, the software is very powerful so that the APs can be customized to the maximum and achieve the best performance of the network at the wifi level. The use of it is very easy for people with low knowledge.
Read full review It can easily support growth and be deployed in multiple locations. The access point has an integrated controller that can manage up to a certain amount of equipment in different locations. Setup is instantaneous and takes approximately 10 minutes to configure itself.
Read full review Return on Investment With only a few DOA's or failing devices, the AP's are of very high quality. We expect them to run stable for many years, which is why our initial investment will be an intelligent choice compared to installing a cheaper product. Although the AP's from Cisco is cutting-edge technology, the 802.11ac standard will be considered legacy in a few years, meaning that its a balance to purchase a well-designed product that won't outlast the tech that it provides. Imagine having an investment in a large fleet of high-quality 802.11b AP's 20 years ago. Although they would still be working flawlessly due to their good quality, the bandwidth would probably be unacceptable to most modern consumers. Read full review We can be in Mobility Express mode where the AP provides the controller functionality to support a small to medium deployment without requiring a dedicated controller. Access Points are centrally managed via a WLC reducing the management overhead for deployment, configuration, and upgrade. Read full review ScreenShots