PRTG Network Monitor is the flagship offering from German software company Paessler, for monitoring local and wide area networks (LANs & WANs), servers, websites, apps, and more.
$1,750
perpetual license
SolarWinds Security Event Manager (SEM)
Score 8.2 out of 10
N/A
SolarWinds LEM is security information and event management (SIEM) software.
Easier to configure, lower cost, greater potential usage, better for mixed environments. Easier to use and certainly easier to setup than the competition.
I didn't make the choice, but out of what we have had in the last 5 years when it comes to network monitoring, this has been the best in my opinion. I would even like to see Auvik go away and this monitor all of our clients. That isn't my choice unfortunately.
Both PRTG and Solarwinds work great, and they are great systems. But for the specific task of monitoring and alerting if there is a VPN connection failure, PRTG works great at monitoring and sending out a status report when a failure does occur. I like both products, but I find …
If there are a number of different protocols and devices to monitor PRTG is really an all in one solution. There are network specific solutions, telephony solutions, server solutions, etc - but this tool can do anything. Even if you don't use this tool as your main "monitoring solutions" every IT professional should have access to this tool for at least troubleshooting purposes. If you are looking for something specific built for a task you may be able to find [a] more direct and easy tool to use that would be easier and quicker to setup as customization is not needed.
Solarwinds SEM is great for generating reports for investigation purposes. Once you set up the connectors you can walk away and the product runs without needing maintenance. It was however pretty difficult to create the reports and alerts when now starting out and it can be very intimidating for new users.
Very, very configurable. You can create all kinds of monitors for all kinds of things. Plus it has loads of suggestions out of the box. It can get complicated but monitoring is complicated. Pretty decent interface and good support - active community.
I really liked how easy it was to add alerts by SMS. So easy to setup.
I like their sizing models (for purchase). We're actually small enough that we are free. But it's not free as in stripped down - it's free because we don't use many "sensors" and don't honestly have the need.
It does a great job of notifying us when accounts have been locked out. We can then find out the device on the network where the login attempt occurred.
Searching for incidents is now a lot faster with the implementation of the HTML 5 interface.
The probe service can be quite resource-intensive. This can cause false-positive readings from some sensors sometimes.
The software gets updated very regularly. Whilst this is usually a good thing to fix bugs etc, it does meantime downtime of the monitoring quite often while they are installed.
The ability to create Maps from Libraries. Very specific issue but a lot of people have been asking for it for years and it is still not available.
All SolarWinds product suffer from slow response times in management portals. SolarWinds SEM is no exception. While it is much preferred over a "thick client" there is much room for improvement in speed.
If you use the email alert features with SolarWinds make sure to prepare you staff and team for the large amount of emails they could receive. Make sure to reduce the number of alerts so your team does not ignore the alerts.
It is pretty likely that we will renew SEM when the time comes up. It is easy to use and maintain so there isn't much of a need to replace this product. It is also a pretty fair price for the capabilities provided by the SEM
The tool is very intuitive to use and it is Windows-based (everybody knows how to use Windows) so it's easy to get into. Every time is setup in a hierarchy so if you have a good initial hierarchy design, it will really reduce administrative effort down the road.
If you are familiar with SolarWinds then you can use this product it's as easy as that. If you have never used a SolarWinds product then it will take a minute to get how they do reports and make dashboards but that being said the tool is great and can make things very easy once you get a feel for how it works and get everything setup how you like it.
I am giving this a 6 simply because I have never had to contact support. The online documentation is adequate for most things, and the user-maintained knowledgebase is excellent. The few times I have run into issues that were not easily resolvable with intuitive UI, I was able to find the answers that I needed either in the PRTG-provided documentation, the knowledgebase, or with a quick online web search.
The quality of support can vary depending on whom you end up speaking with. I was fortunate enough to work with a support representative who was very familiar with the product. He had even authored some of the support documentation on the website. On the flip side, I had two other experiences where I was simply directed to online training material.
I have deployed and tested three products for evaluation I found [PRTG Network Monitor] very easy to deploy, the deployment literally took not more than one hour including basic configuration and network discovery. After deployment few configuration changes and creation of maps, reports and little tweaking is required. [Then] it would go through its process of recommendation that took some time to complete, while [on] other hand other software's took lot of time to install and configure. And features were also missing, which resulted in decision in favor of [PRTG Network Monitor].
Splunk was a pretty good product but the licensing structure needed a lot of work. They changed the structure three times that I am aware and I still had problems understanding LogRhythm had a lot of issues correlating users to IP addresses, the mappings were frequently wrong so this product could not be trusted in my environment as all our access logs are IP based and this needs to be matched to usernames from AD Fortianalzyer is a great product but it can only do logs from Fortigates so that was not helping for anything other than our firewalls.
The ability to analyze multiple pieces of information in one place, especially with historical data, has saved our IT department time and headaches. It would be so much more difficult to trace an issue without PRTG, just relying on event logs and an open task manager window.
The cost is not cheap, so it's an expense that hits the bottom line like everything else. Figure in hardware costs as well, ideally a server outside of your main environment.
I keep saying this, but the historical data piece is worth so much. There's really no good way to collect all of that information in one place without something like PRTG. And that definitely saves time and money in the long run.
For the price, it produced a decent value. It did a lot of the easy stuff well. I can't give any specific data given the objective of the product was to monitor very basic events in the environment.
